Water Pump - Remove
Show/hide table
| 注意 |
|---|
|
在检查、保养、测试、调整及维修产品时，请小心确保盛接油液。 在打开任何舱室或拆卸任何含有油液的部件前，请准备好盛接液体用的适当容器。 |
Show/hide table
| 注意 |
|---|
|
保持所有零件清洁无杂质。 杂质会造成快速磨损並縮短部件使用寿命。 |
- 从冷却系统将冷却液排入合适的容器以便保存或废弃这些冷却液。 请参考操作和保养手册, "冷却系统冷却液 - 更换"。
Show/hide table
图 1 g01354173 - 拆下螺栓 (4)。 将泵进口弯头 (5)从管和水泵 (3)上拆下。 拆下密封件 (7)。
- 拆下螺栓 (6)。
- 拆下螺栓 (1)。 将水泵 (3)从壳体上拆下。
注: 不要通过轴处理水泵或用轴支撑水泵。 不正确的轴处理可能会使轴与水泵中的瓷密封损坏。 这可能会损坏瓷密封件。 密封件的损坏会导致水泵的泄漏和故障。
- 将密封垫 (2)从水泵上拆下。 从水泵上拆下 O 形密封圈。
Caterpillar Information System:
2007/02/01 New Improved Air Lines for Air Compressors Are Now Used {5502}
2009/10/05 New Improved Air Lines for Air Compressors Are Now Used on C15 and C18 Industrial Engines {5502}
3508C, 3512C and 3516C Marine Engines Exhaust Manifold - Remove and Install
C9 On-highway Engine Valve Mechanism Cover
Replacing the Combustion Head for the Aftertreatment Regeneration Device{1088, 1720, 1722} Replacing the Combustion Head for the Aftertreatment Regeneration Device{1088, 1720, 1722}
C4.4 (Mech) Industrial Engine Fuel System Primary Filter/Water Separator - Drain
C4.4 (Mech) Industrial Engine Fuel System Secondary Filter - Replace
C3.4 Engines for Caterpillar Built Machines Piston and Rings
3508C, 3512C and 3516C Marine Engines Exhaust Elbow - Remove and Install
C11 and C13 On-Highway Engines Gear Group (Rear)
3508C, 3512C and 3516C Marine Engines Air Inlet Manifold - Remove and Install
C9 On-highway Engine Fuel Priming Pump - Remove and Install
C9 On-highway Engine Valve Mechanism Cover - Remove and Install
C7 and C9 On-Highway Engines Engine Monitoring Lamp Parameters
C9 On-highway Engine Rocker Arm and Shaft - Remove
CX35 On-Highway Transmission Transmission Planetary - Assemble
2007/02/01 Retirement of the Paper Version of Truck Engine News {1000}
G3516B and G3520B Generator Set Engines Engine Oil Pan - Remove
C9.3 Engines for Caterpillar Built Machines Rocker Arm and Shaft - Install
G3516B and G3520B Generator Set Engines Engine Oil Pan - Install
C4.4 and C6.6 Engines for Caterpillar Built Machines 5 Volt Sensor Supply Circuit - Test
G3516B and G3520B Generator Set Engines Electric Starting Motor - Remove and Install
3508C, 3512C and 3516C Marine Engines Water Pump - Install
3512B and 3516B High Displacement Locomotive Engines Maintenance Recommendations