C11 and C13 On-Highway Engines Caterpillar

Illustration 1	g01353746

Illustration 2	g01353744
View A-A

Illustration 3	g01353781

Note: During assembly, inspect the following components for any foreign materials: the front face of the flywheel housing, the two sides of the flywheel housing gasket and the rear face of the cylinder block. These components must be free of the following substances: oil, fuel, water, gasket adhesive, assembly compounds and any other foreign material.

(1) Apply a small amount of 8T-9022 Silicone Gasket in order to fill the space between the cylinder block, the flywheel housing, and the oil pan before installing the oil pan gasket and the oil pan. The components must be assembled within twenty minutes of applying the sealant.

(C) Distance between the cover of the carrier assembly and the lip seal ... 2.5 ± 0.5 mm (0.10 ± 0.02 inch)

(2) Tighten the bolt to the following torque. ... 125 ± 20 N·m (93 ± 15 lb ft)

Note: Apply 4C-9612 Silicone Sealant between locations A and B.