Model View Illustrations
Show/hide table
 | |
| 图 1 | g01264543 |
自然吸气发动机左视图 为清晰显示，该视图中有一个喷油器没有显示。 (1) 风扇 (2) 燃油喷油器 (3) 电热塞 (4) 机油加注口盖 (5) 吊耳 (6) 排水塞或排放阀 (7) 机油油位计 (8) 飞轮壳 (9) 机油滤清器 (10) 安全阀 (11) 放油塞 (12) 机油压力开关 (13) 喷油泵 (14) 机油加注口 (15) 水泵 | |
Show/hide table
 | |
| 图 2 | g01264517 |
(16) 机油加注口盖 (17) 吊耳 (18) 节温器 (19) 交流发电机 (20) V 形皮带 (21) 曲轴减振器 (22) 起动马达 (23) 排气歧管 | |
Show/hide table
 | |
| 图 3 | g01353575 |
涡轮增压发动机左视图 (1) 电热塞 (2) 进气歧管 (3) 燃油喷油器 (4) 曲轴箱呼吸器 (5) 排水塞或排放阀 (6) 油尺 (7) 喷油泵 (8) 机油滤清器 (9) 安全阀 (10) 放油塞 (11) 机油加注口 (12) V 形皮带 (13) 机油冷却器 (14) 风扇 | |
Show/hide table
 | |
| 图 4 | g01353864 |
涡轮增压发动机右视图 (15) 涡轮增压器 (16) 前吊耳 (17) 冷却液开关 (18) 交流发电机 (19) 起动马达 (20) 油底壳 (21) 飞轮壳体 (22) 飞轮 (23) 排气歧管 (24) 后吊耳 (25) 顶部机油加注口 | |
Caterpillar Information System:
C9 On-highway Engine Engine to Transmission Adapter
2007/03/01 Packaging the Turbocharger {1052}
2007/02/26 Packaging the Turbocharger {1052}
Procedure for Replacing the Particulate Trap Exhaust Filter or the Catalyzed Continuously Regenerating Technology (CCRT) Filter{1091, 7490} Procedure for Replacing the Particulate Trap Exhaust Filter or the Catalyzed Continuously Regenerating Technology (CCRT) Filter{1091, 7490}
3508C, 3512C and 3516C Marine Engines Aftercooler - Remove and Install
C13, C15, and C18 Tier 4 Final Engines Crankshaft
C3.4 Engines for Caterpillar Built Machines Exhaust Manifold
Replacing and Repositioning the Particulate Trap Exhaust Filter Module on Mass Transit Buses{7490} Replacing and Repositioning the Particulate Trap Exhaust Filter Module on Mass Transit Buses{7490}
C3.4 Engines for Caterpillar Built Machines Engine Design
3508C, 3512C and 3516C Marine Engines Turbocharger - Install
C11 and C13 On-Highway Engines Camshaft
325D and 329D Excavators and 325D Material Handler Machine System Specifications Oil Filter (Hydraulic) - Case Drain
C4.4 (Mech) Industrial Engine Fuel System
C3.4 Engines for Caterpillar Built Machines Camshaft
Diesel Particulate Filter Monitor System Information - Download
C3.4 Engines for Caterpillar Built Machines Cylinder Block
C3.4 Engines for Caterpillar Built Machines Crankshaft Seals
C3.4 Engines for Caterpillar Built Machines Connecting Rod
2007/03/05 A New Fuel Indicator is Now Available {7456}
C9 On-highway Engine Fuel Priming Pump - Remove and Install
3508C, 3512C and 3516C Marine Engines Air Inlet Manifold - Remove and Install
C11 and C13 On-Highway Engines Gear Group (Rear)
3508C, 3512C and 3516C Marine Engines Exhaust Elbow - Remove and Install
C3.4 Engines for Caterpillar Built Machines Piston and Rings