C11 and C13 On-Highway Engines Caterpillar


Camshaft

Usage:

C13 JAM


Illustration 1g01188644

(1) Diameter of camshaft bearing journal ... 77.85 mm (3.065 inch)

The lobe on the camshaft for the injector has the most lift when the cam is at zero degrees of rotation. ... 12.697 ± 0.1 mm (0.4999 ± 0.0039 inch)

The lobe on the camshaft for the injector has zero lift through the given rotation. ... 70 degrees to 254 degrees

When the injector lobe opens the lift height is 4.228 ± 0.1 mm (0.1665 ± 0.0039 inch), and the camshaft should have an angle of rotation. ... 35 degrees

(2) Bolts

Torque for the bolts ... 35 ± 8 N·m (26 ± 6 lb ft)

Caterpillar Information System:

325D and 329D Excavators and 325D Material Handler Machine System Specifications Oil Filter (Hydraulic) - Case Drain
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Thermostatic Valve - Install
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Thermostatic Valve - Assemble
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Thermostatic Valve - Disassemble
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Thermostatic Valve - Remove
G3408 and G3412 Engines Carburetor Control Linkage
CX35 On-Highway Transmission Transmission Planetary - Disassemble
C7 On-highway Engine Air Inlet Elbow
CX35 On-Highway Transmission Speed Sensor (Transmission)
2007/04/02 Understanding Transmission Filter Plugging Events {3004, 3067}
CX35 On-Highway Transmission Oil Filter (Transmission)
C18 Marine Auxiliary Engine Model View Illustrations
3508C, 3512C and 3516C Marine Engines Turbocharger - Install
C3.4 Engines for Caterpillar Built Machines Engine Design
Replacing and Repositioning the Particulate Trap Exhaust Filter Module on Mass Transit Buses{7490} Replacing and Repositioning the Particulate Trap Exhaust Filter Module on Mass Transit Buses{7490}
C3.4 Engines for Caterpillar Built Machines Exhaust Manifold
C13, C15, and C18 Tier 4 Final Engines Crankshaft
3508C, 3512C and 3516C Marine Engines Aftercooler - Remove and Install
Procedure for Replacing the Particulate Trap Exhaust Filter or the Catalyzed Continuously Regenerating Technology (CCRT) Filter{1091, 7490} Procedure for Replacing the Particulate Trap Exhaust Filter or the Catalyzed Continuously Regenerating Technology (CCRT) Filter{1091, 7490}
2007/02/26 Packaging the Turbocharger {1052}
2007/03/01 Packaging the Turbocharger {1052}
C9 On-highway Engine Engine to Transmission Adapter
C3.4 IND Industrial Engine Model View Illustrations
C4.4 (Mech) Industrial Engine Fuel System
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.