G3408 and G3412 Engines Caterpillar


Carburetor Control Linkage

Usage:

G3412 3NK



Illustration 1g01095932

(A) Angle of the throttle's lever at the minimum fuel position ... 15 degrees

(B) Angle of the throttle's lever at the maximum fuel position ... 60 degrees

(1) Nut

Torque ... 13 ± 3 N·m (10 ± 2 lb ft)



Illustration 2g01095933

(C) Travel of the actuator's lever ... 36 degrees

(D) Travel of the actuator's shaft ... 26 degrees

(2) Distance from center to center of the rod ends ... 505 mm (19.9 inch)

Caterpillar Information System:

CX35 On-Highway Transmission Transmission Planetary - Disassemble
C7 On-highway Engine Air Inlet Elbow
CX35 On-Highway Transmission Speed Sensor (Transmission)
2007/04/02 Understanding Transmission Filter Plugging Events {3004, 3067}
CX35 On-Highway Transmission Oil Filter (Transmission)
C18 Marine Auxiliary Engine Model View Illustrations
320D, 320D2, 324D, 325D, 329D, 330D and 336D Excavators Long Reach Front Overload Warning - Set - If Equipped
C18 Marine Engines Component Location
CX35 On-Highway Transmission General Troubleshooting Information
G3408 and G3412 Engines Gas Engine Ignition
C18 Marine Auxiliary and Marine Generator Set Engines Event Codes
C18 Marine Auxiliary and Marine Generator Set Engines Diagnostic Trouble Codes
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Thermostatic Valve - Remove
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Thermostatic Valve - Disassemble
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Thermostatic Valve - Assemble
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Thermostatic Valve - Install
325D and 329D Excavators and 325D Material Handler Machine System Specifications Oil Filter (Hydraulic) - Case Drain
C11 and C13 On-Highway Engines Camshaft
3508C, 3512C and 3516C Marine Engines Turbocharger - Install
C3.4 Engines for Caterpillar Built Machines Engine Design
Replacing and Repositioning the Particulate Trap Exhaust Filter Module on Mass Transit Buses{7490} Replacing and Repositioning the Particulate Trap Exhaust Filter Module on Mass Transit Buses{7490}
C3.4 Engines for Caterpillar Built Machines Exhaust Manifold
C13, C15, and C18 Tier 4 Final Engines Crankshaft
3508C, 3512C and 3516C Marine Engines Aftercooler - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.