C18 Marine Engines Caterpillar


Component Location

Usage:

C18 J2K


Illustration 1g01352311
Diagram of components

C18 Engines



Illustration 2g01352317
Typical component locations (left side engine view)
(1) Engine coolant temperature sensor
(2) Coolant level sensor
(3) Fuel temperature sensor
(4) Marine engine control panel
(5) Injector connector at the valve cover base
(6) Inlet manifold air temperature sensor
(7) Intake manifold pressure sensor
(8) Engine interface connector (70 pin)
(9) Service tool connector
(10) Secondary engine speed/timing sensor
(11) Primary engine speed/timing sensor
(12) Timing calibration port
(13) Fuel pressure sensor
(14) Engine oil pressure sensor
(15) Electronic Control Module (ECM)
(16) J2/P2 ECM connector
(17) J1/P1 ECM connector


Illustration 3g01353545
Typical component locations (rear side engine view)
(18) Connector for the timing calibration probe
(19) Connector for the transmission pressure sensor
(20) Connector for the exhaust temperature sensor
(21) Connector for the fuel level sensor
(22) Connector for the transmission temperature sensor


Illustration 4g01354289
(23) Circuit breaker
(24) Maintenance indicator lamp
(25) Diagnostic lamp
(26) Warning lamp
(27) Maintenance clear switch
(28) Emergency stop switch
(29) Hour meter
(30) Keyswitch

Caterpillar Information System:

CX35 On-Highway Transmission General Troubleshooting Information
G3408 and G3412 Engines Gas Engine Ignition
C18 Marine Auxiliary and Marine Generator Set Engines Event Codes
C18 Marine Auxiliary and Marine Generator Set Engines Diagnostic Trouble Codes
G3516B and G3520B Generator Set Engines Crankshaft - Install
G3516B and G3520B Generator Set Engines Crankshaft - Remove
G3516B and G3520B Generator Set Engines Camshaft Bearings - Remove
G3516B and G3520B Generator Set Engines Cylinder Liner - Install
G3516B and G3520B Generator Set Engines Cylinder Liner - Remove
G3516B and G3520B Generator Set Engines Piston and Connecting Rods - Install
2007/02/26 Improved Jacket Water Heaters Are Now Available {1383}
2007/03/12 Improved Camshaft Lifters are Available {1209, 1290}
320D, 320D2, 324D, 325D, 329D, 330D and 336D Excavators Long Reach Front Overload Warning - Set - If Equipped
C18 Marine Auxiliary Engine Model View Illustrations
CX35 On-Highway Transmission Oil Filter (Transmission)
2007/04/02 Understanding Transmission Filter Plugging Events {3004, 3067}
CX35 On-Highway Transmission Speed Sensor (Transmission)
C7 On-highway Engine Air Inlet Elbow
CX35 On-Highway Transmission Transmission Planetary - Disassemble
G3408 and G3412 Engines Carburetor Control Linkage
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Thermostatic Valve - Remove
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Thermostatic Valve - Disassemble
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Thermostatic Valve - Assemble
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Thermostatic Valve - Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.