Thermostatic Valve - Install
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Attach a suitable lifting device to thermostatic valve (1). The weight of thermostatic valve (1) is approximately
23 kg (52 lb) . Position thermostatic valve (1).Show/hide tableIllustration 2 g01352850 - Position the gasket and install the bolts and nuts (5). Install bolts (3) and the washers in the bracket.
- Position tube assembly (4). Install the retainers, the washers, and bolts (2).
- Connect the supply line to the auxiliary water pump.
Show/hide table
Illustration 1 | g01352852 |
Caterpillar Information System:
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Thermostatic Valve - Assemble
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Thermostatic Valve - Disassemble
G3508B, G3512B, G3512B, G3516B and G3520B Petroleum Engines Thermostatic Valve - Remove
G3408 and G3412 Engines Carburetor Control Linkage
CX35 On-Highway Transmission Transmission Planetary - Disassemble
C7 On-highway Engine Air Inlet Elbow
CX35 On-Highway Transmission Speed Sensor (Transmission)
2007/04/02 Understanding Transmission Filter Plugging Events {3004, 3067}
CX35 On-Highway Transmission Oil Filter (Transmission)
C18 Marine Auxiliary Engine Model View Illustrations
320D, 320D2, 324D, 325D, 329D, 330D and 336D Excavators Long Reach Front Overload Warning - Set - If Equipped
C18 Marine Engines Component Location
325D and 329D Excavators and 325D Material Handler Machine System Specifications Oil Filter (Hydraulic) - Case Drain
C11 and C13 On-Highway Engines Camshaft
3508C, 3512C and 3516C Marine Engines Turbocharger - Install
C3.4 Engines for Caterpillar Built Machines Engine Design
Replacing and Repositioning the Particulate Trap Exhaust Filter Module on Mass Transit Buses{7490} Replacing and Repositioning the Particulate Trap Exhaust Filter Module on Mass Transit Buses{7490}
C3.4 Engines for Caterpillar Built Machines Exhaust Manifold
C13, C15, and C18 Tier 4 Final Engines Crankshaft
3508C, 3512C and 3516C Marine Engines Aftercooler - Remove and Install
Procedure for Replacing the Particulate Trap Exhaust Filter or the Catalyzed Continuously Regenerating Technology (CCRT) Filter{1091, 7490} Procedure for Replacing the Particulate Trap Exhaust Filter or the Catalyzed Continuously Regenerating Technology (CCRT) Filter{1091, 7490}
2007/02/26 Packaging the Turbocharger {1052}
2007/03/01 Packaging the Turbocharger {1052}
C9 On-highway Engine Engine to Transmission Adapter