Drive Shaft (Center) - Remove and Install
Specifications
Show/hide table
 | |
| Illustration 1 | g03357039 |
Show/hide table
| Specification for 125-9358 Drive Shaft Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | - | - | Tighten the bolts to 71 ± 10 N·m (52 ± 7 lb ft). |
| 2 | 20 | 138-3816 Bolt | Torque to 170 ± 13 N·m (125 ± 10 lb ft). |
| 3 | 8 | - | Tighten the bolts to 58.5 ± 6.5 N·m (43.1 ± 4.8 lb ft). |
| 4 | 1 | 390-4797 Slip Joint | The spline should be lubricated when the machine is fully articulated. |
Removal Procedure
Start By:
- Connect steering frame lock.
- Remove guard assemblies (1) and (2) .
Show/hide table
 | |
| Illustration 2 | g01147555 |
Show/hide table
 | |
| Illustration 3 | g01147556 |
- Remove bolts (3) and straps (4) from both ends of drive shaft (5). Use two people to remove drive shaft (5). The weight of drive shaft (5) is approximately 27 kg (60 lb).
Show/hide table
 | |
| Illustration 4 | g01147558 |
Installation Procedure
- Install drive shaft (5) in the reverse order of removal.
- Tighten bolts (3) to a torque of 150 ± 15 N·m (111 ± 11 lb ft)
Caterpillar Information System:
980M Tier 3, 982M Tier 3 and 980L Tier 3 Wheel Loader Power Train Modulating Valve (Transmission Clutch) - Remove
966M and 972M Wheel Loaders Capacities (Refill)
980M Tier 3, 982M Tier 3 and 980L Tier 3 Wheel Loader Power Train Modulating Valve (Transmission Clutch) - Install
966H and 972H Wheel Loaders PowerTrain Carrier Bearing (Drive Shaft) - Remove and Install
3500 Engines Pistons and Connecting Rods - Install
966M and 972M Wheel Loaders System Pressure Release
D10T2 Track-Type Tractor Machine Systems Implement Control Valve - Disassemble
966M and 972M Wheel Loaders Backup Alarm - Test - If Equipped
D6N Track-Type Tractor TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565} D6N Track-Type Tractor TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
C7.1 Engines Flywheel Housing - Remove and Install - Standard Housing
Check the Hydraulic Fan Pump on AD55B and AD60 Underground Articulated Trucks{1387, 5070} Check the Hydraulic Fan Pump on AD55B and AD60 Underground Articulated Trucks{1387, 5070}
3500 Engines Pistons and Connecting Rods - Remove
966H and 972H Wheel Loaders PowerTrain Drive Shaft (Rear) - Remove and Install
966H and 972H Wheel Loaders PowerTrain Tire and Rim (Front) - Remove and Install
980M Tier 4 and 982M Tier 4 Wheel Loaders Power Train Torque Converter, Transmission and Output Transfer Gears - Remove
966H and 972H Wheel Loaders PowerTrain Trunnion Support (Oscillating Axle, Rear) - Remove and Install
D6T Track-Type Tractor Window Washer Reservoir - Fill
D10T2 Track-Type Tractor Machine Systems Implement Control Valve - Assemble
2013/08/28 An Improved Service Brake Hose is Used on Certain 966H and 972H Wheel Loaders {4257, 5057}
966H and 972H Wheel Loaders PowerTrain Axle Housing - Disassemble
966H and 972H Wheel Loaders PowerTrain Axle Housing - Assemble
980M Tier 4 and 982M Tier 4 Wheel Loaders Power Train Torque Converter, Transmission and Output Transfer Gears - Install
2013/09/26 An Improved Spool is Now Used for Grapple Control Valves on Certain Wheel Skidders to Improve Tong Cycle Times {5051}
966H and 972H Wheel Loaders PowerTrain Control Manifold (Axle Oil Flow Divider) - Disassemble