Torque Converter, Transmission and Output Transfer Gears - Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 369-5916 | Link Bracket | 2 |
- Attach Tooling (A), and a suitable lifting device to torque converter, transmission, and output transfer gears assembly (14). The weight of torque converter, transmission, and output transfer gears assembly (14) is approximately
1700 kg (3748lb) . - Position torque converter, transmission, and output transfer gears assembly (14).
Show/hide table
Illustration 2 g03422801 - Install bolts (21).
- Slightly raise torque converter, transmission, and output transfer gears (14). Remove suitable blocking (20) from engine (22). Install clip (19).
Show/hide table
Illustration 3 g03422776 Show/hide tableIllustration 4 g03422796 - Use two people to install mount assembly (16). The weight of mount assembly (16) is approximately
25 kg (55 lb) . Install bolts (17). Repeat for the opposite side. - Install transmission mounting bolts (15). Tighten bolts (15) and (18) to a torque of
900 ± 100 N·m (664 ± 74 lb ft) .Show/hide tableIllustration 5 g03422764 - Install fill tube assembly (13).
Show/hide table
Illustration 6 g03422747 - Connect hose assembly (12) .
Show/hide table
Illustration 7 g03422706 - Connect hose assembly (11).
Show/hide table
Illustration 8 g03422703 - Connect hose assemblies (9). Install clip (10).
Show/hide table
Illustration 9 g03422697 - Tighten clamp (8).
Show/hide table
Illustration 10 g03422694 - Connect tube assembly (7). Tighten clip (6).
Show/hide table
Illustration 11 g03422689 - Connect tube assemblies (4) and (5).
Show/hide table
Illustration 12 g03422680 - Connect hose assemblies (1) and (2). Install clips (3).
Show/hide table
Illustration 1 | g03422769 |
End By:
- Remove the steering control valve.
- Remove the center drive shaft.
- Remove the rear drive shaft.
- Remove the power train guard (Transmission).
- Remove the crankcase guard.
- Remove the clean emissions module.
- Remove the hydraulic tank.
Caterpillar Information System:
966H and 972H Wheel Loaders PowerTrain Axle Housing - Assemble
966H and 972H Wheel Loaders PowerTrain Axle Housing - Disassemble
2013/08/28 An Improved Service Brake Hose is Used on Certain 966H and 972H Wheel Loaders {4257, 5057}
D10T2 Track-Type Tractor Machine Systems Implement Control Valve - Assemble
D6T Track-Type Tractor Window Washer Reservoir - Fill
966H and 972H Wheel Loaders PowerTrain Trunnion Support (Oscillating Axle, Rear) - Remove and Install
980M Tier 4 and 982M Tier 4 Wheel Loaders Power Train Torque Converter, Transmission and Output Transfer Gears - Remove
966H and 972H Wheel Loaders PowerTrain Tire and Rim (Front) - Remove and Install
966H and 972H Wheel Loaders PowerTrain Drive Shaft (Rear) - Remove and Install
966H and 972H Wheel Loaders PowerTrain Drive Shaft (Center) - Remove and Install
980M Tier 3, 982M Tier 3 and 980L Tier 3 Wheel Loader Power Train Modulating Valve (Transmission Clutch) - Remove
966M and 972M Wheel Loaders Capacities (Refill)
2013/09/26 An Improved Spool is Now Used for Grapple Control Valves on Certain Wheel Skidders to Improve Tong Cycle Times {5051}
966H and 972H Wheel Loaders PowerTrain Control Manifold (Axle Oil Flow Divider) - Disassemble
966H and 972H Wheel Loaders PowerTrain Control Manifold (Axle Oil Flow Divider) - Assemble
966H and 972H Wheel Loaders PowerTrain Differential Pinion - Assemble
966H and 972H Wheel Loaders PowerTrain Limited Slip Differential - Assemble
966H and 972H Wheel Loaders PowerTrain Differential - Assemble
D6N Track-Type Tractor TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565} D6N Track-Type Tractor TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
C7.1 Industrial Engine Battery or Battery Cable - Disconnect
980M Tier 3, 982M Tier 3 and 980L Tier 3 Wheel Loader Power Train Fixed Axle (Front) - Remove
D10T2 Track-Type Tractor Machine Systems Bulldozer Lift Cylinder - Remove and Install
980H Wheel Loader Engine Supplement Refrigerant Condenser - Remove and Install
966M and 972M Wheel Loaders Leaving the Machine