Removal Procedure
 |
Personal injury can result from contact with refrigerant. Contact with refrigerant can cause frost bite. Keep face and hands away to help prevent injury. Protective goggles must always be worn when refrigerant lines are opened, even if the gauges indicate the system is empty of refrigerant. Always use precaution when a fitting is removed. Slowly loosen the fitting. If the system is still under pressure, release it slowly in a well ventilated area. Personal injury or death can result from inhaling refrigerant through a lit cigarette. Inhaling air conditioner refrigerant gas through a lit cigarette or other smoking method or inhaling fumes released from a flame contacting air conditioner refrigerant gas, can cause bodily harm or death. Do not smoke when servicing air conditioners or wherever refrigerant gas may be present. Use a certified recovery and recycling cart to properly remove the refrigerant from the air conditioning system. |
 |
- Refer to Service Manual, SENR5664, "All Products Air Conditioning and Heating Systems for All Caterpillar Machines" for the correct charging and recovery procedure. Refer to Special Publication, NENG2500, "Air Conditioning Tools" for the tools.
- Open rear door (1) .
 | |
| Illustration 1 | g03417993 |
- Remove nuts (2). Disconnect hose assemblies (3) .
 | |
| Illustration 2 | g03423167 |
- Remove bolts (4). Remove refrigerant condenser (5) .
 | |
| Illustration 3 | g03423173 |
Installation Procedure
- Install refrigerant condenser (5) in the reverse order of removal.
- Tighten nuts (2) to a torque of 21 ± 3 N·m (186 ± 27 lb in).