Control Manifold (Axle Oil Flow Divider) - Disassemble
Disassembly Procedure
Start By:
- Remove the control manifold.
- Remove check valves (2) and flow divider valve (3) from control manifold (1) .
Show/hide table
 | |
| Illustration 1 | g01151852 |
- Remove O-ring seals (4) and backup ring (5) from check valve (2). Repeat this Step for the other check valve.
Show/hide table
 | |
| Illustration 2 | g01151853 |
- Remove O-ring seals (6) and backup rings (7) from flow divider valve (3) .
Show/hide table
 | |
| Illustration 3 | g01151854 |
- Remove relief valve (8) from control manifold (1) .
Show/hide table
 | |
| Illustration 4 | g01151855 |
- Remove O-ring seals (9) and backup ring (10) from relief valve (8) .
Show/hide table
 | |
| Illustration 5 | g01151857 |
Caterpillar Information System:
2013/09/26 An Improved Spool is Now Used for Grapple Control Valves on Certain Wheel Skidders to Improve Tong Cycle Times {5051}
980M Tier 4 and 982M Tier 4 Wheel Loaders Power Train Torque Converter, Transmission and Output Transfer Gears - Install
966H and 972H Wheel Loaders PowerTrain Axle Housing - Assemble
966H and 972H Wheel Loaders PowerTrain Axle Housing - Disassemble
2013/08/28 An Improved Service Brake Hose is Used on Certain 966H and 972H Wheel Loaders {4257, 5057}
D10T2 Track-Type Tractor Machine Systems Implement Control Valve - Assemble
D6T Track-Type Tractor Window Washer Reservoir - Fill
966H and 972H Wheel Loaders PowerTrain Trunnion Support (Oscillating Axle, Rear) - Remove and Install
980M Tier 4 and 982M Tier 4 Wheel Loaders Power Train Torque Converter, Transmission and Output Transfer Gears - Remove
966H and 972H Wheel Loaders PowerTrain Tire and Rim (Front) - Remove and Install
966H and 972H Wheel Loaders PowerTrain Drive Shaft (Rear) - Remove and Install
966H and 972H Wheel Loaders PowerTrain Drive Shaft (Center) - Remove and Install
966H and 972H Wheel Loaders PowerTrain Control Manifold (Axle Oil Flow Divider) - Assemble
966H and 972H Wheel Loaders PowerTrain Differential Pinion - Assemble
966H and 972H Wheel Loaders PowerTrain Limited Slip Differential - Assemble
966H and 972H Wheel Loaders PowerTrain Differential - Assemble
D6N Track-Type Tractor TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565} D6N Track-Type Tractor TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
C7.1 Industrial Engine Battery or Battery Cable - Disconnect
980M Tier 3, 982M Tier 3 and 980L Tier 3 Wheel Loader Power Train Fixed Axle (Front) - Remove
D10T2 Track-Type Tractor Machine Systems Bulldozer Lift Cylinder - Remove and Install
980H Wheel Loader Engine Supplement Refrigerant Condenser - Remove and Install
966M and 972M Wheel Loaders Leaving the Machine
D9T Track-Type Tractor Machine Systems Hydraulic Tank - Remove and Install
966M and 972M Wheel Loaders Equipment Lowering with Engine Stopped