An Improved Spool is Now Used for Grapple Control Valves on Certain Wheel Skidders to Improve Tong Cycle Times {5051}
- Wheel Skidder:
- 525C (S/N: 5251465-UP)
- 535C (S/N: 535589-UP)
- 545C (S/N: 545954-UP)
Description of Change: A new spool is now installed in the valve body of the grapple control valve. Installation of the new spool increases the speed of tong open and close cycle times.
Adaptable To: The new spool is only used in machines equipped with the following valves:
- 381-7956 Bank Valve Gp (Four bank valve)
- 381-7957 Bank Valve (Four bank valve)
- 381-7958 Bank Valve (Five bank valve)
Note: 381-7958 Bank Valve is also known as a grapple control valve.
Show/hide table
Required Parts     | |
---|---|
Part Number     | Description     |
372-7472     | Spool     |
This change is adaptable to the following machines:
- (S/N: 525C1465-1859)
- (S/N: 535C589-700)
- (S/N: 545C954-1135)
- (S/N: 525C1860-UP)
- (S/N: 535C701-UP)
- (S/N: 545C1136-UP)
Caterpillar Information System:
980M Tier 4 and 982M Tier 4 Wheel Loaders Power Train Torque Converter, Transmission and Output Transfer Gears - Install
966H and 972H Wheel Loaders PowerTrain Axle Housing - Assemble
966H and 972H Wheel Loaders PowerTrain Axle Housing - Disassemble
2013/08/28 An Improved Service Brake Hose is Used on Certain 966H and 972H Wheel Loaders {4257, 5057}
D10T2 Track-Type Tractor Machine Systems Implement Control Valve - Assemble
D6T Track-Type Tractor Window Washer Reservoir - Fill
966H and 972H Wheel Loaders PowerTrain Trunnion Support (Oscillating Axle, Rear) - Remove and Install
980M Tier 4 and 982M Tier 4 Wheel Loaders Power Train Torque Converter, Transmission and Output Transfer Gears - Remove
966H and 972H Wheel Loaders PowerTrain Tire and Rim (Front) - Remove and Install
966H and 972H Wheel Loaders PowerTrain Drive Shaft (Rear) - Remove and Install
966H and 972H Wheel Loaders PowerTrain Drive Shaft (Center) - Remove and Install
980M Tier 3, 982M Tier 3 and 980L Tier 3 Wheel Loader Power Train Modulating Valve (Transmission Clutch) - Remove
966H and 972H Wheel Loaders PowerTrain Control Manifold (Axle Oil Flow Divider) - Disassemble
966H and 972H Wheel Loaders PowerTrain Control Manifold (Axle Oil Flow Divider) - Assemble
966H and 972H Wheel Loaders PowerTrain Differential Pinion - Assemble
966H and 972H Wheel Loaders PowerTrain Limited Slip Differential - Assemble
966H and 972H Wheel Loaders PowerTrain Differential - Assemble
D6N Track-Type Tractor TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565} D6N Track-Type Tractor TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
C7.1 Industrial Engine Battery or Battery Cable - Disconnect
980M Tier 3, 982M Tier 3 and 980L Tier 3 Wheel Loader Power Train Fixed Axle (Front) - Remove
D10T2 Track-Type Tractor Machine Systems Bulldozer Lift Cylinder - Remove and Install
980H Wheel Loader Engine Supplement Refrigerant Condenser - Remove and Install
966M and 972M Wheel Loaders Leaving the Machine
D9T Track-Type Tractor Machine Systems Hydraulic Tank - Remove and Install