980M Tier 3, 982M Tier 3 and 980L Tier 3 Wheel Loader Power Train Caterpillar


Modulating Valve (Transmission Clutch) - Install

Usage:

980L D8Z

Installation Procedure



    Illustration 1g03422628

  1. Install modulating valve (3). Install bolts (1). Tighten bolts (1) to a torque of 30 ± 4 N·m (22 ± 3 lb ft). Connect harness assembly (1).

End By:

a. Install the power train Guard (Transmission).

b. Separate the Steering Frame Lock.

Caterpillar Information System:

966H and 972H Wheel Loaders PowerTrain Carrier Bearing (Drive Shaft) - Remove and Install
3500 Engines Pistons and Connecting Rods - Install
966M and 972M Wheel Loaders System Pressure Release
D10T2 Track-Type Tractor Machine Systems Implement Control Valve - Disassemble
966M and 972M Wheel Loaders Backup Alarm - Test - If Equipped
D6N Track-Type Tractor TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565} D6N Track-Type Tractor TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
C7.1 Engines Flywheel Housing - Remove and Install - Standard Housing
Check the Hydraulic Fan Pump on AD55B and AD60 Underground Articulated Trucks{1387, 5070} Check the Hydraulic Fan Pump on AD55B and AD60 Underground Articulated Trucks{1387, 5070}
3500 Engines Pistons and Connecting Rods - Remove
966M and 972M Wheel Loaders Bucket Linkage and Loader Cylinder Bearings - Lubricate
D10T2 Track-Type Tractor Machine Systems Refrigerant Condenser - Remove and Install
990K Wheel Loader and 844K Wheel Dozer Engine Supplement Fan Blade (Spider) - Remove and Install
966M and 972M Wheel Loaders Capacities (Refill)
980M Tier 3, 982M Tier 3 and 980L Tier 3 Wheel Loader Power Train Modulating Valve (Transmission Clutch) - Remove
966H and 972H Wheel Loaders PowerTrain Drive Shaft (Center) - Remove and Install
966H and 972H Wheel Loaders PowerTrain Drive Shaft (Rear) - Remove and Install
966H and 972H Wheel Loaders PowerTrain Tire and Rim (Front) - Remove and Install
980M Tier 4 and 982M Tier 4 Wheel Loaders Power Train Torque Converter, Transmission and Output Transfer Gears - Remove
966H and 972H Wheel Loaders PowerTrain Trunnion Support (Oscillating Axle, Rear) - Remove and Install
D6T Track-Type Tractor Window Washer Reservoir - Fill
D10T2 Track-Type Tractor Machine Systems Implement Control Valve - Assemble
2013/08/28 An Improved Service Brake Hose is Used on Certain 966H and 972H Wheel Loaders {4257, 5057}
966H and 972H Wheel Loaders PowerTrain Axle Housing - Disassemble
966H and 972H Wheel Loaders PowerTrain Axle Housing - Assemble
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.