Fan Blade (Spider) - Remove and Install
- Attach a suitable lifting device to grill (2). The weight of grill (2) is approximately
68 kg (150 lb) . Remove bolts (1) and grill (2).Show/hide tableIllustration 2 g03422320 - Disconnect hose assemblies (3) and harness assemblies (4).
Show/hide table
Illustration 3 g03422325 - Attach a suitable lifting device to fan assembly (5). The weight of fan assembly (5) is approximately
136 kg (300 lb) . Remove bolts (6) and fan assembly (5).Show/hide tableIllustration 4 g03422662 - Remove bolts (7) and fan blade (8).
Show/hide table
Illustration 1 | g03422295 |
- Install fan blade (8) in the reverse order of removal.
Caterpillar Information System:
D6N Track-Type Tractor Transmission Breather - Clean/Replace
D10T2 Track-Type Tractor Machine Systems Piston Pump (Fan Charge and Pilot Pressure) - Remove and Install
980H Wheel Loader Engine Supplement Refrigerant Compressor - Remove and Install
D6T Track-Type Tractor Track - Check/Adjust
621K, 623K, and 627K Wheel Tractor-Scrapers Systems Control Valve (Implement) - 621K and 627K
836K Landfill Compactor, 834K Wheel Dozer and 988K Wheel Loader C18 Engine Supplement Engine Oil Cooler - Remove and Install
D10T2 Track-Type Tractor Machine Systems Pilot Oil Accumulator - Remove and Install
901C, 902C and 903C Compact Wheel Loaders PowerTrain Differential (Standard) - Assemble
D6T Track-Type Tractor Torque Converter Scavenge Screen - Clean
Check the Transmission Input Yoke on AD55B and AD60 Underground Articulated Trucks{3063, 3253} Check the Transmission Input Yoke on AD55B and AD60 Underground Articulated Trucks{3063, 3253}
D6T Track-Type Tractor Ripper Linkage and Cylinder Bearings - Lubricate
980H Wheel Loader Engine Supplement Air Cleaner - Remove and Install
D10T2 Track-Type Tractor Machine Systems Refrigerant Condenser - Remove and Install
966M and 972M Wheel Loaders Bucket Linkage and Loader Cylinder Bearings - Lubricate
3500 Engines Pistons and Connecting Rods - Remove
Check the Hydraulic Fan Pump on AD55B and AD60 Underground Articulated Trucks{1387, 5070} Check the Hydraulic Fan Pump on AD55B and AD60 Underground Articulated Trucks{1387, 5070}
C7.1 Engines Flywheel Housing - Remove and Install - Standard Housing
D6N Track-Type Tractor TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565} D6N Track-Type Tractor TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
966M and 972M Wheel Loaders Backup Alarm - Test - If Equipped
D10T2 Track-Type Tractor Machine Systems Implement Control Valve - Disassemble
966M and 972M Wheel Loaders System Pressure Release
3500 Engines Pistons and Connecting Rods - Install
966H and 972H Wheel Loaders PowerTrain Carrier Bearing (Drive Shaft) - Remove and Install
980M Tier 3, 982M Tier 3 and 980L Tier 3 Wheel Loader Power Train Modulating Valve (Transmission Clutch) - Install