Piston Pump (Fan Charge and Pilot Pressure) - Remove and Install
拆卸步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
A     | FT-1114     | 真空舱     | 1     |
5P-0306 | 真空传感器     | 1     | |
6V-4142 | 接头     | 1     | |
5K-5068 | 接头     | 1     |
开始:
- 释放液压系统压力。
Show/hide table
滚热的油或液压油的压力会对人员造成伤害。 发动机停机之后,液压油的压力仍会保留在液压系统里。 对液压系统进行维修之前,如果不事先释放压力,可能会造成严重伤害。 卸下机具和其油路之前,必须先把机具放到地面上,让油先冷却,才可进行工作。 只能在发动机停机,并且加注口盖冷却到可以用徒手触摸时才能卸下加注口盖。 |
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修发动机时,请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前,要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品,请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
- 将工具 (A) 安装到液压油箱上。 将软管 (1) 连接到工具 (A) 和气源的接头上。 施加 276 至 414 kPa (40 至 60 psi) 的气压。 此步骤将使液压系统抽吸出真空。
Show/hide table
图 1 | g03513056 |
- 拆卸地板垫 (2) 。
Show/hide table
图 2 | g03422270 |
- 拆下地板 (3) 。
Show/hide table
图 3 | g03422271 |
- 拆下所有软管组件 (4) 。
Show/hide table
图 4 | g03517802 |
- 卸下安装螺栓 (5) 。 拆下风扇充注和先导压力泵 (6) 。
Show/hide table
图 5 | g03517803 |
安装步骤
- 按与拆卸相反的顺序安装风扇充注和先导压力泵 (6) 。
Caterpillar Information System:
980H Wheel Loader Engine Supplement Refrigerant Compressor - Remove and Install
D6T Track-Type Tractor Track - Check/Adjust
621K, 623K, and 627K Wheel Tractor-Scrapers Systems Control Valve (Implement) - 621K and 627K
836K Landfill Compactor, 834K Wheel Dozer and 988K Wheel Loader C18 Engine Supplement Engine Oil Cooler - Remove and Install
D10T2 Track-Type Tractor Machine Systems Pilot Oil Accumulator - Remove and Install
901C, 902C and 903C Compact Wheel Loaders PowerTrain Differential (Standard) - Assemble
D6T Track-Type Tractor Torque Converter Scavenge Screen - Clean
Check the Transmission Input Yoke on AD55B and AD60 Underground Articulated Trucks{3063, 3253} Check the Transmission Input Yoke on AD55B and AD60 Underground Articulated Trucks{3063, 3253}
D6T Track-Type Tractor Ripper Linkage and Cylinder Bearings - Lubricate
980H Wheel Loader Engine Supplement Air Cleaner - Remove and Install
2013/09/09 Improved Horizontal Plates Are Now Used in the Track Roller Frame on Certain D3K, D4K, and D5K Track-Type Tractors {7050, 7051}
D6T Track-Type Tractor Lift Cylinder Yoke Bearings - Lubricate
D6N Track-Type Tractor Transmission Breather - Clean/Replace
990K Wheel Loader and 844K Wheel Dozer Engine Supplement Fan Blade (Spider) - Remove and Install
D10T2 Track-Type Tractor Machine Systems Refrigerant Condenser - Remove and Install
966M and 972M Wheel Loaders Bucket Linkage and Loader Cylinder Bearings - Lubricate
3500 Engines Pistons and Connecting Rods - Remove
Check the Hydraulic Fan Pump on AD55B and AD60 Underground Articulated Trucks{1387, 5070} Check the Hydraulic Fan Pump on AD55B and AD60 Underground Articulated Trucks{1387, 5070}
C7.1 Engines Flywheel Housing - Remove and Install - Standard Housing
D6N Track-Type Tractor TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565} D6N Track-Type Tractor TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
966M and 972M Wheel Loaders Backup Alarm - Test - If Equipped
D10T2 Track-Type Tractor Machine Systems Implement Control Valve - Disassemble
966M and 972M Wheel Loaders System Pressure Release
3500 Engines Pistons and Connecting Rods - Install