C13 On-highway Engine Caterpillar

Main Bearing Journal

Usage:

C13 LEE

Show/hide table

Table 1
Main Bearing Journal
Original size journal	108.000 ± 0.020 mm (4.2520 ± 0.0008 inch)
Undersize journal 0.508 mm (.0200 inch)	107.492 ± 0.020 mm (4.2320 ± 0.0008 inch)
Undersize journal 0.762 mm (.0300 inch)	107.238 ± 0.020 mm (4.2220 ± 0.0008 inch)

The clearance between a new bearing and a new journal is the following value. ... 0.059 to 0.157 mm (.0023 to .0062 inch)

Show/hide table

Table 2
Main Bearing Bore
Main bearing bore (original size)	116.000 ± 0.013 mm (4.5669 ± 0.0005 inch)
Oversize bore in block 0.508 mm (.0200 inch)	115.492 ± 0.020 mm (4.5469 ± 0.0008 inch)

Caterpillar Information System:

CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Replaced Relay or Solenoid Does Not Operate

CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Engine Does Not Crank

C13 On-highway Engine Crankshaft

CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission Does Not Automatically Shift Back Into Gear

C15 On-Highway Engine Engine Oil Pan

C11 and C13 Engines and 14M and 16M Motor Graders Shutdown (Ground Level) - Test

C15 On-Highway Engine Engine Oil Pan

G3304B and G3306B Engines Valve Lash Is Excessive

C11 and C13 Engines and 14M and 16M Motor Graders Sensor Supply - Test

G3520C and G3520E Generator Set Engines Indicator Lamp - Test

CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission Does Not Automatically Shift Into Neutral

G3520C and G3520E Generator Set Engines Speed Control (Switch) - Test

CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission Does Not Respond to Shift Selector

2006/09/11 Make Sure That the Plug and the Gasket are Installed in the Cylinder Head {1100, 1118}

G3520C and G3520E Generator Set Engines Sensor Signal (PWM) - Test

Reuse and Salvage for 3200 Engine Cylinder Blocks {1201} Reuse and Salvage for 3200 Engine Cylinder Blocks {1201}

Caterpillar Parts Pricing{1000, 7000, 756P} Caterpillar Parts Pricing{1000, 7000, 756P}

G3520C and G3520E Generator Set Engines Oil Pressure Is High

C15 On-Highway Engine Vibration Damper and Pulley

3500 Engines Air Shutoff - Remove and Install

G3520C and G3520E Generator Set Engines Sensor Signal (Analog, Passive) - Test

G3520C and G3520E Generator Set Engines Generator Output Power - Test

G3520C and G3520E Generator Set Engines Sensor Signal (Analog, Active) - Test

C11 and C13 Engines and 14M and 16M Motor Graders Speed Control (Switch) - Test