Flywheel - Remove
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | - | Guide Bolt M12 X 1.75 by 120 mm |
1 |
Start By:
- Remove the electric starting motor. Refer to Disassembly and Assembly, "Electric Starting Motor - Remove and Install".
- Remove top bolt (1).
Show/hide table
Illustration 2 g01265489 - Install Tooling (A). Remove remaining bolts (1). Remove spacer plate (2), flex plate (4), and hub (3) from the flywheel housing.
- Remove flywheel (5) from the dowel in the crankshaft and Tooling (A).
- Replace the flywheel ring gear , if necessary. Use a hammer and a punch in order to remove the flywheel ring gear.
Show/hide table
Illustration 1 | g01265514 |
Caterpillar Information System:
C13 Engine for Caterpillar Built Machines Valve Actuator (Variable) - Remove and Install
C15 and C18 Industrial Engines Flywheel Housing - Remove and Install
3500B Industrial Engines with the ADEM 3 Electronic Control Module CAN Data Link
C7 On-Highway Engine Inlet Manifold Temperature Sensor - Remove and Install
C13 Engine Vibration Damper and Pulley - Remove and Install
C7 On-Highway Engine Inlet Manifold Pressure Sensor - Remove and Install
3512C Engine Programmable System Parameters
C7 On-Highway Engine Fuel Pressure Sensor - Remove and Install - Rail
2006/05/15 New ECM Software is Available {7620}
C7 Urban Transit Bus Engines Cooling System Coolant Sample (Level 2) - Obtain
C13 Engine Water Temperature Regulator - Remove and Install
C4.4 Industrial Engine Fuel Injection
3500B Industrial Engines with the ADEM 3 Electronic Control Module Cat Data Link
770 and 772 Off-Highway Trucks Automatic Lubrication System Visual Inspection
C7 On-Highway Engine Flywheel - Install
TA19-M2WD and TA19-M4WD Agricultural Transmissions Modulating Valve (Transmission Clutch) - Remove and Install
3044C Industrial Engine Plate Locations and Film Locations
3500B Industrial Engines with the ADEM 3 Electronic Control Module Electrical Power Supply
TA19-M2WD and TA19-M4WD Agricultural Transmissions Relief Valve (Transmission Main) - Remove
TA19-M2WD and TA19-M4WD Agricultural Transmissions Relief Valve (Transmission Main) - Install
C7 On-Highway Engine Fuel Transfer Pump - Remove
G3304 and G3306 Engines Coolant Level Sensor
3412E and C30 Marine Engines Cooling System Coolant (DEAC) - Change
C13 Engine Accessory Drive - Disassemble