C7 On-Highway Engine Caterpillar


Inlet Manifold Temperature Sensor - Remove and Install

Usage:

C7 C7S

Removal Procedure



    Illustration 1g01266912

  1. Disconnect harness assembly (1).

  2. Remove inlet manifold temperature sensor (2).

Installation Procedure



    Illustration 2g01266912

  1. Install inlet manifold temperature sensor (2). Tighten inlet manifold temperature sensor (2) to a torque of 20 ± 5 N·m (15 ± 4 lb ft).

  2. Connect harness assembly (1).

Caterpillar Information System:

C13 Engine Vibration Damper and Pulley - Remove and Install
C7 On-Highway Engine Inlet Manifold Pressure Sensor - Remove and Install
3512C Engine Programmable System Parameters
C7 On-Highway Engine Fuel Pressure Sensor - Remove and Install - Rail
2006/05/15 New ECM Software is Available {7620}
C7 Urban Transit Bus Engines Cooling System Coolant Sample (Level 2) - Obtain
C13 Engine Water Temperature Regulator - Remove and Install
C4.4 Industrial Engine Fuel Injection
C13 and C15 On-Highway Engines Customer Assistance
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Service Connections
UPS 1000S/ UPS 1200S Uninterruptible Power Supplys Discharge Modes
2006/04/24 A New Tube Assembly is Released {1380}
3500B Industrial Engines with the ADEM 3 Electronic Control Module CAN Data Link
C15 and C18 Industrial Engines Flywheel Housing - Remove and Install
C13 Engine for Caterpillar Built Machines Valve Actuator (Variable) - Remove and Install
C7 On-Highway Engine Flywheel - Remove
3500B Industrial Engines with the ADEM 3 Electronic Control Module Cat Data Link
770 and 772 Off-Highway Trucks Automatic Lubrication System Visual Inspection
C7 On-Highway Engine Flywheel - Install
TA19-M2WD and TA19-M4WD Agricultural Transmissions Modulating Valve (Transmission Clutch) - Remove and Install
3044C Industrial Engine Plate Locations and Film Locations
3500B Industrial Engines with the ADEM 3 Electronic Control Module Electrical Power Supply
TA19-M2WD and TA19-M4WD Agricultural Transmissions Relief Valve (Transmission Main) - Remove
TA19-M2WD and TA19-M4WD Agricultural Transmissions Relief Valve (Transmission Main) - Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.