Relief Valve (Transmission Main) - Install
Installation Procedure
- Install relief valve (2) .
Show/hide table
Illustration 1 | g01329210 |
- Install bolts (1). Tighten bolts (1) to a torque of 30 ± 4 N·m (22 ± 3 lb ft).
Caterpillar Information System:
TA19-M2WD and TA19-M4WD Agricultural Transmissions Relief Valve (Transmission Main) - Remove
3500B Industrial Engines with the ADEM 3 Electronic Control Module Electrical Power Supply
3044C Industrial Engine Plate Locations and Film Locations
TA19-M2WD and TA19-M4WD Agricultural Transmissions Modulating Valve (Transmission Clutch) - Remove and Install
C7 On-Highway Engine Flywheel - Install
770 and 772 Off-Highway Trucks Automatic Lubrication System Visual Inspection
3500B Industrial Engines with the ADEM 3 Electronic Control Module Cat Data Link
C7 On-Highway Engine Flywheel - Remove
C13 Engine for Caterpillar Built Machines Valve Actuator (Variable) - Remove and Install
C15 and C18 Industrial Engines Flywheel Housing - Remove and Install
3500B Industrial Engines with the ADEM 3 Electronic Control Module CAN Data Link
C7 On-Highway Engine Inlet Manifold Temperature Sensor - Remove and Install
C7 On-Highway Engine Fuel Transfer Pump - Remove
G3304 and G3306 Engines Coolant Level Sensor
3412E and C30 Marine Engines Cooling System Coolant (DEAC) - Change
C13 Engine Accessory Drive - Disassemble
3412E and C30 Marine Engines Cooling System Coolant (ELC) - Change
C7 On-Highway Engine Fuel Transfer Pump - Install
C13 Engine Accessory Drive - Assemble
C27 and C32 Engines for Caterpillar Built Machines Water Temperature Regulator Housing - Remove and Install
TA19-M2WD and TA19-M4WD Agricultural Transmissions Pump Drive - Remove
C9 On-highway Engine Fuel Control Manifold (ARD) - Disassemble
C9 On-highway Engine Fuel Control Manifold (ARD) - Assemble
3500B Industrial Engines with the ADEM 3 Electronic Control Module Emergency Stop Switch