2008/08/11 Caterpillar


New C18 Cylinder Liners and O-ring Seals are Used {1201, 1216, 1216}

Usage:

24M B9K
Motor Grader:
24M (S/N: B9K1-UP)
Cold Planer:
PM-200 (S/N: P1C1-UP)
PM-201 (S/N: PNM1-UP)
PM200 (S/N: P1M1-UP)
Landfill Compactor:
836H (S/N: BXD1-UP)
Excavator:
385C (S/N: EDA1-UP; MMA1-UP; KGB1-UP; KBC1-UP; SBE1-UP; T2E1-UP; T2F1-UP; KKK1-UP; EAM1-UP; JCM1-UP; WAW1-UP; MNZ1-UP)
Mobile Hydraulic Power Unit:
385C MHPU (S/N: MSF1-UP)
Off-Highway Truck/Tractor:
772 (S/N: RLB1-UP)
Track-Type Tractor:
D9T (S/N: RJS1-UP)
Underground Articulated Truck:
AD45B (S/N: CXM1-UP)
AD55 (S/N: DNW1-UP)
Wheel Dozer:
834H (S/N: BTX1-UP)
Wheel Loader:
988H (S/N: BXY1-UP)
Wheel Tractor-Scraper:
631G (S/N: DFA1-UP)
637G (S/N: DFJ1-UP)
657G (S/N: W1B1-UP; W1C1-UP)

Description of Change: Several improvements have been made to the profiles of the cylinder liner on the C18 engines in order to increase durability. Also, the two bottom cylinder liner seals are now the same part number.

Adaptable To: The new 322-1126 Cylinder Liner and the 155-2793 Liner Seal are adaptable to the serial numbers that are listed above.




Illustration 1g01622070

(1) Location of the two 155-2793 Liner Seals

Caterpillar Information System:

613G Wheel Tractor-Scraper Steering System Pump Control Valve (Secondary Steering) - Test and Adjust
2008/09/29 A New Pilot Valve for the Elevator is Now Available on Certain Wheel Tractor-Scrapers {5059, 5304}
Installation of the 318-8496 Engine Kit (Power Optimization) for the 980H Wheel Loader{1000} Installation of the 318-8496 Engine Kit (Power Optimization) for the 980H Wheel Loader{1000}
D11T Track-Type Tractor Ladder System
613G Wheel Tractor-Scraper Steering System Steering Time - Check
2008/09/22 New Actuator Groups Are Now Installed On The Implement Valves {5051, 5264}
613G Wheel Tractor-Scraper Steering System Vane Pump (Implement, Steering)
2008/10/06 Improvements To The Medium Wheel Loader Ride Control Accumulator {5004, 5077}
2008/09/22 Improvements Have Been Made to the Water Lines Groups {1380}
613G Wheel Tractor-Scraper Fuel Tank Breather - Replace
2008/08/11 An Improved Pump Control Valve Is Available For the Implement/Steering Pumps That Are Used on Certain Backhoe Loaders and Small Wheel Loaders {5455}
2008/08/04 Proper use of the Set Screw on the Pump Control Can Improve Reliability {5070, 5455}
2008/08/11 Missing Backflow Check Valve {5068}
PL61 Pipelayer Machine Systems Hydraulic Accumulator (Boom, Hook) - Disassemble
Electronic Technician Failure While Calibrating{0785, 7569} Electronic Technician Failure While Calibrating{0785, 7569}
613G Wheel Tractor-Scraper Steering System Relief Valve (Steering) - Test and Adjust
613G Wheel Tractor-Scraper Machine Systems Floor
Procedure For Configuring The Implement Valve Solenoid{5264, 5479} Procedure For Configuring The Implement Valve Solenoid{5264, 5479}
2008/10/06 Improvement for Hose Routing of 994 Wheel Loader Dual Tilt Hose Kickout {5057, 5104}
PL61 Pipelayer Machine Systems Hydraulic Accumulator (Boom, Hook) - Assemble
3408E and 3412E Engines for Caterpillar Built Machines Fuel Temperature Sensor
E194 Event Codes Falsely Alert the Driver by Illuminating the Diagnostic Lamp on Wheel Tractor Scrapers{1901, 7620} E194 Event Codes Falsely Alert the Driver by Illuminating the Diagnostic Lamp on Wheel Tractor Scrapers{1901, 7620}
613G Wheel Tractor-Scraper System Pressure Release
2008/08/11 A New PIN Plate Is Being Installed {7000, 7557}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.