- Off-Highway Truck/Tractor:
- 793D (S/N: FDB1-UP; 8WM1-UP)
Description of Change: A new bracket assembly has been added to the water lines group for the aftercooler in the above models. The new bracket assembly allows added clamps to provide improved retention of the tube at the O-ring seal.
Adaptable To: The new parts can be used on prior serial numbers. Table 1 lists the former parts and new parts that are required for the serial number 8WM1731-UP.
Description     | Former Part Number     | New Part Number     | Qty     |
Bracket Assembly     | 304-5781     | 326-7311     | 1     |
Clip     | -     | 317-2845     | 2     |
Clamp Assembly     | -     | 124-6333     | 2     |
Bolt     | -     | 0S-1591     | 2     |
Bolt     | -     | 2A-4639     | 2     |
Hard Washer     | -     | 3V-3308     | 6     |
Hard Washer     | -     | 5M-2894     | 2     |
Illustration 1 | g01621647 |
(1) Bolt hole on 326-7311 Bracket As that is used as the zero plane (2) Two added holes that are 10.5 mm (0.4 inch) in diameter. |
Illustration 2 | g01621651 |
(5) 326-7311 Bracket As (6) 317-2845 Clip (7) 124-6333 Clamp As (8) 0S-1591 Bolt (9) 2A-4639 Bolt (10) 3V-3308 Hard Washer (11) 5M-2894 Hard Washer |
Table 2 lists the former parts and additional new parts that are required for the serial numbers 8WM00804-01730.
Description     | Former Part Number     | New Part Number     | Qty     |
Bracket     | 267-4445     | 316-1959     | 1     |
Tube     | 257-6361     | 314-6175     | 1     |
Bolt     | -     | 0S-1594     | 2     |
Bolt     | -     | 0S-1619     | 2     |
Retaining Ring     | 1W-4099     | 7E-7209     | 1     |
Full Nut     | -     | 9S-8752     | 6     |
Clamp assembly     | 1w-4072     | 124-6333     | 4     |
Clip     | -     | 317-2845     | 2     |
Bolt     | -     | 0S-1591     | 2     |
Bolt     | -     | 2A-4639     | 2     |
Hard Washer     | -     | 3V-3308     | 10     |
Hard Washer     | -     | 5M-2894     | 2     |
Illustration 3 | g01625861 |
(3) Bolt hole on 316-1959 Bracket that is used as the zero plane (4) Two added holes that are 10.5 mm (0.4 inch) in diameter. |
Illustration 4 | g01634780 |
(6) 317-2845 Clip (7) 124-6333 Clamp As (8) 0S-1591 Bolt (9) 2A-4639 Bolt (10) 3V-3308 Hard Washer (11) 5M-2894 Hard Washer (12) 316-1959 Bracket (13) 124-6333 Clamp As (14) 9S-8752 Full Nut (15) 0S-1594 Bolt (16) 0S-1619 Bolt (17) 314-6175 Tube (18) 7E-7209 Retaining Ring |
Effective Serial Numbers     | |
S/N:8WM01980-UP     |