613G Wheel Tractor-Scraper Machine Systems Caterpillar


Floor

Usage:

613G DBE



Illustration 1g01622143



Illustration 2g01622476

313-1611 Shim (1) thickness ... 4 mm (0.16 inch)

Use shims (1) in order to achieve clearance (A). ... 3.1 ± 1.6 mm (0.12 ± 0.06 inch)

Torque for nuts (2) ... 610 ± 95 N·m (450 ± 70 lb ft)

Clearance between the door and the bottom of the bowl (B) ... 4.1 ± 2.3 mm (0.16 ± 0.09 inch)

Caterpillar Information System:

613G Wheel Tractor-Scraper Steering System Relief Valve (Steering) - Test and Adjust
Electronic Technician Failure While Calibrating{0785, 7569} Electronic Technician Failure While Calibrating{0785, 7569}
PL61 Pipelayer Machine Systems Hydraulic Accumulator (Boom, Hook) - Disassemble
2008/08/11 Missing Backflow Check Valve {5068}
2008/08/11 New C18 Cylinder Liners and O-ring Seals are Used {1201, 1216, 1216}
613G Wheel Tractor-Scraper Steering System Pump Control Valve (Secondary Steering) - Test and Adjust
2008/09/29 A New Pilot Valve for the Elevator is Now Available on Certain Wheel Tractor-Scrapers {5059, 5304}
Installation of the 318-8496 Engine Kit (Power Optimization) for the 980H Wheel Loader{1000} Installation of the 318-8496 Engine Kit (Power Optimization) for the 980H Wheel Loader{1000}
D11T Track-Type Tractor Ladder System
613G Wheel Tractor-Scraper Steering System Steering Time - Check
2008/09/22 New Actuator Groups Are Now Installed On The Implement Valves {5051, 5264}
613G Wheel Tractor-Scraper Steering System Vane Pump (Implement, Steering)
Procedure For Configuring The Implement Valve Solenoid{5264, 5479} Procedure For Configuring The Implement Valve Solenoid{5264, 5479}
2008/10/06 Improvement for Hose Routing of 994 Wheel Loader Dual Tilt Hose Kickout {5057, 5104}
PL61 Pipelayer Machine Systems Hydraulic Accumulator (Boom, Hook) - Assemble
3408E and 3412E Engines for Caterpillar Built Machines Fuel Temperature Sensor
E194 Event Codes Falsely Alert the Driver by Illuminating the Diagnostic Lamp on Wheel Tractor Scrapers{1901, 7620} E194 Event Codes Falsely Alert the Driver by Illuminating the Diagnostic Lamp on Wheel Tractor Scrapers{1901, 7620}
613G Wheel Tractor-Scraper System Pressure Release
2008/08/11 A New PIN Plate Is Being Installed {7000, 7557}
994F Wheel Loader Camera - Video Camera (If Equipped)
320D Excavator Camera
D6K Track-Type Tractor Mirror - If Equipped
2008/08/18 Installation Of Software On A Replacement ECM {7610, 7620}
3408E and 3412E Engines for Caterpillar Built Machines Electrical Connectors - Inspect
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.