Crankshaft Seals
Show/hide table
图 1 | g01455434 |
典型实例 |
(1)曲轴
(2)曲轴密封件
(3)塑料套筒
(4)对准工具
Show/hide table
图 2 | g00915076 |
(5) 将螺栓 1、2、3、4、5、6、7和10 按图 2 所示拧紧至以下扭矩。 ...
拆卸对准工具。
将螺栓 8 和 9 按图 2所示拧紧至以下转矩。 ...
Caterpillar Information System:
C4.4 Industrial Engine Engine Oil and Filter - Change
C15 Industrial Engine Poor Acceleration or Response
C15 Industrial Engine Low Power/Poor or No Response to Throttle
C3.3 and C4.4 Generator Sets Engine Oil Pan - Remove and Install
C9 Industrial Engines Piston and Rings
2006/10/23 An Improved Turbocharger is Used {1052, 1053}
C15 Petroleum Generator Set Engines Cylinder Block
C3.3 and C4.4 Generator Sets Camshaft - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Piston and Rings - C32 Engines
G3508, G3512 and G3516 Engines Engine Oil Cooler - Install
C3.3 and C4.4 Generator Sets Cylinder Head - Install - Four Cylinder Engines
C3.3 and C4.4 Generator Sets Cylinder Head - Remove - Four Cylinder Engines
C4.4 Industrial Engine Alternator
C4.4 Industrial Engine Starter Motor
C3.3 and C4.4 Generator Sets Engine Oil Filter Base - Remove and Install
C3.3 and C4.4 Generator Sets Speed/Timing Sensor - Remove and Install
C3.3 and C4.4 Generator Sets Electric Starting Motor - Remove and Install
C7 Urban Transit Bus Engines Maintenance Interval Schedule
C4.4 Industrial Engine Gear Group (Front)
C3.3 and C4.4 Generator Sets Engine Enclosure Group - Remove and Install
C4.4 Industrial Engine Exhaust Manifold
C9 Industrial Engines Front Housing and Covers
C4.4 Industrial Engine Connecting Rod Bearing Journal - Steel Crankshaft
C4.4 Industrial Engine Rocker Shaft