Electronic Control Module - Remove and Install
拆卸步骤
- 将蓄电池断路开关转到"断开"位置。
- 断开蓄电池处的蓄电池负极接线端。
- 松开六角头固定螺钉 (1) 。 断开电子控制模块 (5) 上的线束组件。
Show/hide table
图 1 | g01208278 |
- 断开软管组件 (2) 和 (4) 。
- 拆下螺栓 (6) 。 拆下电子控制模块 (5) 和接地电缆带 (3) 。
- 将垫圈 (7) 和隔离安装 (8) 从电子控制模块 (5) 上拆下。
安装步骤
- 将隔离安装 (8) 定位到电子控制模块 (5) 上。 将隔套、垫圈 (7) 、接地母线 (3) 和电子控制模块 (5) 定位到支架组件上。 安装螺栓 (6) 。
Show/hide table
图 2 | g01208278 |
- 连接软管组件 (4) 和 (2) 。
- 连接线束组件和电子控制模块 (5) 。 拧紧六角头螺钉 (1) 至扭矩为 6 ± 1 N·m (53 ± 9 lb in)。
- 连接蓄电池处的蓄电池负极接线端。
- 将蓄电池断路开关转到"接通"位置。
Caterpillar Information System:
3500 Engines Fuel Transfer Pump
C32 Petroleum Engines Camshaft - Install
C32 Petroleum Engines Camshaft Bearings - Install
C32 Petroleum Engines Camshaft Bearings - Remove
C175 Generator Set Engines Crankshaft Front Seal - Install
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Seat Support - Remove and Install
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Seat Suspension - Remove and Install
2005/10/03 Caterpillar Warranty Claims on Cylinder Head Valves {1105}
C175 Generator Set Engines Crankshaft Front Seal - Remove
2005/10/01 Caterpillar Warranty Claims on Cylinder Head Valves {1105}
TH48-E80 Petroleum Transmission Power Train Electronic Control System Speed Sensor (Transmission Output) - Replace
C175 Generator Set Engines Exhaust Elbow - Remove and Install
C6.6 Engines for Caterpillar Built Machines Charging System - Test
C6.6 Engines for Caterpillar Built Machines Alternator - Test
C32 Petroleum Engines Alternator - Remove and Install
3612 and 3616 Engines Fuel Pressure Control Valve - Remove
C175 Generator Set Engines Front Drive Housing - Remove and Install
C15 On-Highway Engine Fuel Transfer Pump
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Counterweight - Remove and Install
3612 and 3616 Engines Fuel Pressure Control Valve - Install
C32 Petroleum Engines Exhaust Elbow - Remove and Install
C27 and C32 Generator Set Engines Start Relay Circuit - Test
3500 Engines Replacing the ECM
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Final Drive - Assemble