Seat Suspension - Remove and Install
开始:
- 拆下操作员控制台。 请参阅拆解和组装 , "操作员控制台 - 拆卸和安装" 。
- 拆下螺栓 (1)。
Show/hide table
图 2 g01208073 - 向前滑动座椅悬架 ( 3)。
- 拆下螺栓 (2)。 座椅悬架 (3)需要两个人拆下。 座椅悬架 (3) 的重量约为
36 kg (80 lb) 。
Show/hide table
图 1 | g01208071 |
- 需要两个人才能安装座椅悬架 ( 3)。 座椅悬架 (3) 的重量约为
36 kg (80 lb) 。 安装螺栓 (2)。 拧紧螺栓 ( 2) 至扭矩为28 ± 7 N·m (20 ± 5 lb ft) 。Show/hide table图 4 g01208071 - 向后滑动座椅悬架,然后安装螺栓 ( 1)。 用
28 ± 7 N·m (20 ± 5 lb ft) 的扭矩拧紧螺栓 ( 1)。
Show/hide table
图 3 | g01208073 |
结束:
- 拆下操作员控制台。 请参阅拆解和组装 , "操作员控制台 - 拆卸和安装" 。
Caterpillar Information System:
2005/10/03 Caterpillar Warranty Claims on Cylinder Head Valves {1105}
C175 Generator Set Engines Crankshaft Front Seal - Remove
2005/10/01 Caterpillar Warranty Claims on Cylinder Head Valves {1105}
TH48-E80 Petroleum Transmission Power Train Electronic Control System Speed Sensor (Transmission Output) - Replace
C175 Generator Set Engines Exhaust Elbow - Remove and Install
C32 Petroleum Engines Inlet Air Temperature Sensor - Remove and Install
C32 Petroleum Engines Turbocharger Outlet Pressure Sensor - Remove and Install
320E and 323E Excavators Machine System Specifications Solenoid Valve (Quick Coupler)
C1.5 and C2.2 Generator Set Engines Engine Enclosure Group - Remove and Install
2005/10/03 Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03 Starting the Engine with Jumper Cables on Machines with an Electric Starter {1000, 7000}
345C MHPU Mobile Hydraulic Power Unit Machine Systems Fuel Tank - Install
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Seat Support - Remove and Install
C175 Generator Set Engines Crankshaft Front Seal - Install
C32 Petroleum Engines Camshaft Bearings - Remove
C32 Petroleum Engines Camshaft Bearings - Install
C32 Petroleum Engines Camshaft - Install
3500 Engines Fuel Transfer Pump
C27 and C32 Generator Set Engines Electronic Control Module - Remove and Install
C6.6 Engines for Caterpillar Built Machines Charging System - Test
C6.6 Engines for Caterpillar Built Machines Alternator - Test
C32 Petroleum Engines Alternator - Remove and Install
3612 and 3616 Engines Fuel Pressure Control Valve - Remove
C175 Generator Set Engines Front Drive Housing - Remove and Install