Fuel Tank - Install
安装步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件说明     | 数量     |
A     | 138-7575     | 连杆支架     | 4     |
- 将工具 (A) 和适当的起吊设备连接在油箱 (6) 上。 油箱 (6) 的重量约为 277 kg (610 lb)。 在机器上将油箱 (6) 放置到位。
Show/hide table
图 1 | g01207936 |
- 将螺栓 (9) 安装到油箱 (6) 上。
Show/hide table
图 2 | g01207937 |
Show/hide table
图 3 | g01207938 |
- 连接软管组件 (10) 和 (12) 。 打开燃油切断阀 (11) 。
- 安置防护罩 (8) 并安装螺栓 (7) 。
- 拆下工具 (A) 。 定位扶手 (4) 并安装螺栓 (5) 。
Show/hide table
图 4 | g01207934 |
- 连接软管组件 (1) 。 安装螺母 (2) 。 连接线束组件 (3) 。
Show/hide table
图 5 | g01207933 |
- 加注燃油箱。 如有必要,请参阅操作和保养手册, "燃油系统 - 充油"。
Caterpillar Information System:
345C MHPU Mobile Hydraulic Power Unit Machine Systems Fuel Tank - Remove
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Actuator Motor (Air Distributor) - Remove and Install
C32 Petroleum Engines Fuel Temperature Sensor - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines Cylinder Liner
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Window Wiper Motor - Remove and Install - Lower
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Final Drive - Disassemble
C32 Petroleum Engines Fuel Pressure Sensor - Remove and Install
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Auxiliary Water Pump - Assemble
C32 Petroleum Engines Engine Oil Pressure Sensor - Remove and Install
C32 Petroleum Engines Coolant Temperature Sensor - Remove and Install
345C MHPU Mobile Hydraulic Power Unit Machine Systems Seat - Remove and Install
C32 Petroleum Engines Crankshaft Position Sensor - Remove and Install
2005/10/03 Starting the Engine with Jumper Cables on Machines with an Electric Starter {1000, 7000}
2005/10/03 Caterpillar Warranty Claims on Cylinder Head Valves {1105}
C1.5 and C2.2 Generator Set Engines Engine Enclosure Group - Remove and Install
320E and 323E Excavators Machine System Specifications Solenoid Valve (Quick Coupler)
C32 Petroleum Engines Turbocharger Outlet Pressure Sensor - Remove and Install
C32 Petroleum Engines Inlet Air Temperature Sensor - Remove and Install
C175 Generator Set Engines Exhaust Elbow - Remove and Install
TH48-E80 Petroleum Transmission Power Train Electronic Control System Speed Sensor (Transmission Output) - Replace
2005/10/01 Caterpillar Warranty Claims on Cylinder Head Valves {1105}
C175 Generator Set Engines Crankshaft Front Seal - Remove
2005/10/03 Caterpillar Warranty Claims on Cylinder Head Valves {1105}
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Seat Suspension - Remove and Install