Fuel Tank - Remove
拆卸步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件说明 | 数量 |
| A | 138-7575 | 连杆支架 | 4 |
- 排空油箱 请参阅操作和保养手册, "燃油系统水和沉淀物 - 排放"。
- 断开软管组件 (1) 。 拆下螺母 (2) 。 断开线束组件 (3) 。
Show/hide table
 | |
| 图 1 | g01207933 |
- 拆下螺栓 (5) 和扶手 (4) 。
Show/hide table
 | |
| 图 2 | g01207934 |
- 将工具 (A) 和适当的起吊设备连接在油箱 (6) 上。 油箱 (6) 的重量约为 277 kg (610 lb)。
Show/hide table
 | |
| 图 3 | g01207936 |
- 卸下螺栓 (7) 和防护罩 (8) 。
Show/hide table
 | |
| 图 4 | g01207937 |
Show/hide table
 | |
| 图 5 | g01207938 |
- 关闭燃油切断阀 (11) 。 断开软管组件 (10) 和 (12) 。
- 从油箱上拆下螺栓 (9) 。
- 使用工具 (A) 和适当的起吊设备拆下油箱 (6) 。
Caterpillar Information System:
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Actuator Motor (Air Distributor) - Remove and Install
C32 Petroleum Engines Fuel Temperature Sensor - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines Cylinder Liner
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Window Wiper Motor - Remove and Install - Lower
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Final Drive - Disassemble
C32 Petroleum Engines Fuel Pressure Sensor - Remove and Install
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Auxiliary Water Pump - Assemble
C32 Petroleum Engines Engine Oil Pressure Sensor - Remove and Install
C32 Petroleum Engines Coolant Temperature Sensor - Remove and Install
345C MHPU Mobile Hydraulic Power Unit Machine Systems Seat - Remove and Install
C32 Petroleum Engines Crankshaft Position Sensor - Remove and Install
345C MHPU Mobile Hydraulic Power Unit Machine Systems Pilot Valve (Travel) - Install
345C MHPU Mobile Hydraulic Power Unit Machine Systems Fuel Tank - Install
2005/10/03 Starting the Engine with Jumper Cables on Machines with an Electric Starter {1000, 7000}
2005/10/03 Caterpillar Warranty Claims on Cylinder Head Valves {1105}
C1.5 and C2.2 Generator Set Engines Engine Enclosure Group - Remove and Install
320E and 323E Excavators Machine System Specifications Solenoid Valve (Quick Coupler)
C32 Petroleum Engines Turbocharger Outlet Pressure Sensor - Remove and Install
C32 Petroleum Engines Inlet Air Temperature Sensor - Remove and Install
C175 Generator Set Engines Exhaust Elbow - Remove and Install
TH48-E80 Petroleum Transmission Power Train Electronic Control System Speed Sensor (Transmission Output) - Replace
2005/10/01 Caterpillar Warranty Claims on Cylinder Head Valves {1105}
C175 Generator Set Engines Crankshaft Front Seal - Remove
2005/10/03 Caterpillar Warranty Claims on Cylinder Head Valves {1105}