Pilot Valve (Travel) - Install
安装步骤
注: 检查 O 形密封圈有无磨损或损坏。 必要时更换 O 形密封圈。
- 将先导阀 (18) 放置到位,然后安装螺栓 (17) 。
Show/hide table
图 1 | g00805746 |
注: 确保阀门端口处于正确位置。
- 将波纹管 (16) 安装到先导阀上。
Show/hide table
图 2 | g00805743 |
- 将行驶踏板 (13) 和 (14) 定位在先导阀上。 安装螺栓 (15) 。 拧紧螺栓 (15) 至扭矩为 33 ± 3 N·m (25 ± 3 lb ft)。
Show/hide table
图 3 | g00805740 |
- 在行驶踏板上安装橡胶踏板 (12) 和 (11) 。
Show/hide table
图 4 | g00805736 |
- 在行驶踏板周围安装橡胶地板垫 (10) 。
Show/hide table
图 5 | g01207620 |
- 将液压接头 (9) 和 (8) 安装到先导阀中。
Show/hide table
图 6 | g00805726 |
注: 液压接头 (9) 是带滤清器的液压接头。
- 连接软管组件 (3) 、 (4) 、 (5) 、 (7) 和 (6) 。 拧紧所有软管组件至扭矩为 37 ± 4 N·m (27 ± 3 lb ft)。
Show/hide table
图 7 | g00805699 |
- 检查液压系统油位。 请参阅操作和保养手册, "液压系统油位 – 检查"。
- 使用螺栓 (2) 安装薄板 (1) 。
Show/hide table
图 8 | g01207616 |
Caterpillar Information System:
3512C Engine for 785D Off-Highway Truck/Tractors Engine Design
3512C and 3516C Marine Engines Engine Design
C32 Petroleum Engines Camshaft Position Sensor - Remove and Install
C-9 Industrial Engine Maintenance Interval Schedule
TH48-E80 Petroleum Transmission Power Train Electronic Control System Quick To Neutral Function
TH48-E80 Petroleum Transmission Power Train Electronic Control System Lockup Clutch Disable Function
3500C Marine Engines Engine Design
C27 and C32 Generator Set Engines Speed Control (Switch) - Test
793D Off-Highway Truck Power Train Liquid Level Switch (Torque Converter Oil)
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System Charging System - Test
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Exhaust Temperature Is Too High
C32 Petroleum Engines Atmospheric Pressure Sensor - Remove and Install
C32 Petroleum Engines Crankshaft Position Sensor - Remove and Install
345C MHPU Mobile Hydraulic Power Unit Machine Systems Seat - Remove and Install
C32 Petroleum Engines Coolant Temperature Sensor - Remove and Install
C32 Petroleum Engines Engine Oil Pressure Sensor - Remove and Install
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Auxiliary Water Pump - Assemble
C32 Petroleum Engines Fuel Pressure Sensor - Remove and Install
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Final Drive - Disassemble
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Window Wiper Motor - Remove and Install - Lower
3408E and 3412E Engines for Caterpillar Built Machines Cylinder Liner
C32 Petroleum Engines Fuel Temperature Sensor - Remove and Install
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Actuator Motor (Air Distributor) - Remove and Install
345C MHPU Mobile Hydraulic Power Unit Machine Systems Fuel Tank - Remove