Hitch Bearings - Install
Installation Procedure
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 1P-1835 | Bearing Puller Adapter | 1 |
| 5F-7693 | Spacer | 1 | |
| 5P-4184 | Stud | 1 | |
| 6V-3175 | Cylinder Group | 1 | |
| 6V-9061 | Hand Pump | 1 | |
| 7H-7539 | Nut | 1 | |
- Use Tool (A) to install sleeve bearing (3) to hitch (2) . Install the sleeve bearing until the sleeve bearing is centered in the hitch.
Show/hide table
 | |
| Illustration 1 | g00452179 |
- Install three thrust washers (1) to hitch (2) .
Show/hide table
 | |
| Illustration 2 | g00452178 |
- Repeat this procedure for the upper hitch bearing.
End By: Connect the tractor and the scraper. Refer to Disassembly and Assembly, "Tractor and Scraper - Connect". The information is in this manual.
Caterpillar Information System:
615C Series II Wheel Tractor-Scraper Machine Systems Hitch Bearings - Remove
924Gz Wheel Loader Warranty Information
966G and 972G Wheel Loaders Power Train Differential and Bevel Gear - Install
3116 Engine Supplement for 953C Track-Type Loader Alternator Belt - Remove and Install
994D Wheel Loader Engine Oil and Filter - Change
928G Wheel Loader Tilt Cylinder Bearings and Bucket Linkage Bearings - Lubricate
994D Wheel Loader Engine Oil Level - Check
994D Wheel Loader Engine Mounts - Inspect
994D Wheel Loader Engine Crankcase Breather - Clean
994D Wheel Loader Engine Components - Replace/Install Reman
3116 Engine Supplement for 953C Track-Type Loader Alternator - Remove and Install
966G and 972G Wheel Loaders Power Train Differential and Bevel Gear - Remove
994D Wheel Loader Ether Starting Aid Cylinder - Replace
615C Series II Wheel Tractor-Scraper Machine Systems Draft Frame Bearings - Remove and Install
950G Wheel Loader and 962G Wheel Loader Electrohydraulic System Lift Kickout Positioner - Adjust
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Pilot Valve (Oil Manifold) - Disassemble
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Pilot Valve (Oil Manifold) - Assemble
966G and 972G Wheel Loaders Power Train Heat Exchanger (Axle Oil Cooler) - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines Governor - Disassemble
994D Wheel Loader Fuel System - Prime
994D Wheel Loader Fuel System Primary Filter - Clean/Inspect/Replace
615C Series II Wheel Tractor-Scraper Machine Systems Elevator Control Valve - Disassemble
613C Series II Wheel Tractor-Scraper Machine Systems Ejector - Remove
613C Series II Wheel Tractor-Scraper Machine Systems Ejector - Install