Elevator Control Valve - Disassemble
Disassembly Procedure
Start By:
- Remove the elevator control valve. Refer to Disassembly and Assembly, "Elevator Control Valve - Remove". The information is in this manual.
Show/hide table
 | |
| Illustration 1 | g00453029 |
- Remove four bolts (1) , two caps (2) and the O-ring seals from valve assembly (3) .
- Remove four springs (4) and four springs (5) from valve assembly (3) .
- Remove two spacers (6) from valve assembly (3) .
- Remove two retainers (7) and the O-ring seals from valve assembly (3) .
- Remove relief valve (8) from valve assembly (3) .
- Remove spool (9) from valve assembly (3) .
Caterpillar Information System:
994D Wheel Loader Fuel System Primary Filter - Clean/Inspect/Replace
994D Wheel Loader Fuel System - Prime
3304B and 3306B Engines for Caterpillar Built Machines Governor - Disassemble
966G and 972G Wheel Loaders Power Train Heat Exchanger (Axle Oil Cooler) - Remove and Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Pilot Valve (Oil Manifold) - Assemble
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Pilot Valve (Oil Manifold) - Disassemble
950G Wheel Loader and 962G Wheel Loader Electrohydraulic System Lift Kickout Positioner - Adjust
615C Series II Wheel Tractor-Scraper Machine Systems Draft Frame Bearings - Remove and Install
994D Wheel Loader Ether Starting Aid Cylinder - Replace
615C Series II Wheel Tractor-Scraper Machine Systems Hitch Bearings - Install
615C Series II Wheel Tractor-Scraper Machine Systems Hitch Bearings - Remove
924Gz Wheel Loader Warranty Information
613C Series II Wheel Tractor-Scraper Machine Systems Ejector - Remove
613C Series II Wheel Tractor-Scraper Machine Systems Ejector - Install
966G and 972G Wheel Loaders Power Train Torque Converter from Transmission, Output Transfer Gears - Separate
3176C and 3196 Engines for Caterpillar Built Machines Rocker Shaft
Test Sequence For Caterpillar 7000 Series Fuel Nozzles{1254} Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Removal and Installation of 138-0006 Retainer and 138-0007 Retainer Removal and Installation of 138-0006 Retainer and 138-0007 Retainer
3116 Engine Supplement for 953C Track-Type Loader Engine - Remove
994D Wheel Loader Fuel Tank Cap and Strainer - Clean
994D Wheel Loader Power Train Torque Converter Troubleshooting
994D Wheel Loader Fuel Tank Water and Sediment - Drain
615C Series II Wheel Tractor-Scraper Machine Systems Elevator Control Valve - Assemble
3116 Engine Supplement for 953C Track-Type Loader Engine - Install