Fuel System Primary Filter - Clean/Inspect/Replace
Show/hide table
 | |
| Ilustrasi 1 | g00733063 |
- Kendorkan baut penahan (1) .
Show/hide table
 | |
| Ilustrasi 2 | g00452644 |
- Lepas rumah filter (2) dan elemen filter.
- Cucilah elemen filter, rumah filter, dan base dari rumah filter dengan cairan pembersih, yang tidak mudah terbakar.
- Gunakan udara bertekanan untuk mengeringkan elemen filter.
- Periksa seal pada rumah filter. Ganti seal jika telah rusak.
- Periksa elemen filter. Apabila elemen filter telah rusak, ganti elemen filter.
- Pasang kembali elemen filter dan rumah filter (2) ke dalam base rumah filter.
Show/hide table
| PERHATIAN |
|---|
Jangan mengisi filter bahan bakar dengan bahan bakar sebelum memasangnya. Bahan bakar yang terkontaminasi akan menyebabkan keausan yang dipercepat pada sukucadang sistem bahan bakar. |
- Kemudian kencangkan baut penahan (1) dengan torsi 24 ± 4 N·m (18 ± 3 lb ft).
- Tutup kembali pintu akses engine.
Caterpillar Information System:
994D Wheel Loader Fuel System - Prime
3304B and 3306B Engines for Caterpillar Built Machines Governor - Disassemble
966G and 972G Wheel Loaders Power Train Heat Exchanger (Axle Oil Cooler) - Remove and Install
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Pilot Valve (Oil Manifold) - Assemble
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Pilot Valve (Oil Manifold) - Disassemble
950G Wheel Loader and 962G Wheel Loader Electrohydraulic System Lift Kickout Positioner - Adjust
615C Series II Wheel Tractor-Scraper Machine Systems Draft Frame Bearings - Remove and Install
994D Wheel Loader Ether Starting Aid Cylinder - Replace
615C Series II Wheel Tractor-Scraper Machine Systems Hitch Bearings - Install
615C Series II Wheel Tractor-Scraper Machine Systems Hitch Bearings - Remove
924Gz Wheel Loader Warranty Information
966G and 972G Wheel Loaders Power Train Differential and Bevel Gear - Install
615C Series II Wheel Tractor-Scraper Machine Systems Elevator Control Valve - Disassemble
613C Series II Wheel Tractor-Scraper Machine Systems Ejector - Remove
613C Series II Wheel Tractor-Scraper Machine Systems Ejector - Install
966G and 972G Wheel Loaders Power Train Torque Converter from Transmission, Output Transfer Gears - Separate
3176C and 3196 Engines for Caterpillar Built Machines Rocker Shaft
Test Sequence For Caterpillar 7000 Series Fuel Nozzles{1254} Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Removal and Installation of 138-0006 Retainer and 138-0007 Retainer Removal and Installation of 138-0006 Retainer and 138-0007 Retainer
3116 Engine Supplement for 953C Track-Type Loader Engine - Remove
994D Wheel Loader Fuel Tank Cap and Strainer - Clean
994D Wheel Loader Power Train Torque Converter Troubleshooting
994D Wheel Loader Fuel Tank Water and Sediment - Drain
615C Series II Wheel Tractor-Scraper Machine Systems Elevator Control Valve - Assemble