Tilt Cylinder Bearings and Bucket Linkage Bearings - Lubricate
Wipe all of the fittings before you apply lubricant.
Show/hide table
Illustration 1 | g00101817 |
Apply lubricant to the four grease fittings for the bucket tilt on the machine.
Show/hide table
Illustration 2 | g00448378 |
Show/hide table
Illustration 3 | g00451943 |
Apply lubricant to the remote grease fitting for the bucket tilt cylinder.
There is a total of 5 grease fittings.
.
Caterpillar Information System:
994D Wheel Loader Engine Oil Level - Check
994D Wheel Loader Engine Mounts - Inspect
994D Wheel Loader Engine Crankcase Breather - Clean
994D Wheel Loader Engine Components - Replace/Install Reman
3116 Engine Supplement for 953C Track-Type Loader Alternator - Remove and Install
966G and 972G Wheel Loaders Power Train Differential and Bevel Gear - Remove
994D Wheel Loader Engine Components - Clean/Inspect, Rebuild/Install Reman, Install New
994D Wheel Loader Engine Air Precleaner - Clean
3116 Engine Supplement for 953C Track-Type Loader Air Inlet Heater - Remove and Install
994D Wheel Loader Engine Air Filter Secondary Element - Replace
994D Wheel Loader Hydraulic System Hydraulic System Pressure - Release
615C Series II Wheel Tractor-Scraper Machine Systems Accumulator (Axle Suspension) - Install
994D Wheel Loader Engine Oil and Filter - Change
3116 Engine Supplement for 953C Track-Type Loader Alternator Belt - Remove and Install
966G and 972G Wheel Loaders Power Train Differential and Bevel Gear - Install
924Gz Wheel Loader Warranty Information
615C Series II Wheel Tractor-Scraper Machine Systems Hitch Bearings - Remove
615C Series II Wheel Tractor-Scraper Machine Systems Hitch Bearings - Install
994D Wheel Loader Ether Starting Aid Cylinder - Replace
615C Series II Wheel Tractor-Scraper Machine Systems Draft Frame Bearings - Remove and Install
950G Wheel Loader and 962G Wheel Loader Electrohydraulic System Lift Kickout Positioner - Adjust
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Pilot Valve (Oil Manifold) - Disassemble
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Machine Systems Pilot Valve (Oil Manifold) - Assemble
966G and 972G Wheel Loaders Power Train Heat Exchanger (Axle Oil Cooler) - Remove and Install