Test Kit Checks Oil Coolers for Leaks {0768, 0781, 0783, 0784}
- Caterpillar Products:
- All
Show/hide table
Illustration 1 | g01081461 |
The 242-7135 Oil Cooler Tester Gp (Kit) checks any oil cooler that is available on Cat products for leaks. The ability to check an oil cooler for leaks eliminates the unnecessary replacement of the oil cooler.
For more information on the use of the test kit, refer to the Service Manual, REHS1758, "Test Procedure for Brazed and Rubber End Sheet Oil Coolers".
Show/hide table
Service Parts for the 242-7135 Oil Cooler Tester Gp (Kit)     | |
Pt. No.     | Description     |
210-6990     | Pressure Gauge (LCD Display, 0 TO 500-PSI)     |
4C-7056     | Hose As     |
4C-8858     | Coupler     |
6V-7145     | Case     |
1P-3703     | Rectangular Seal     |
1P-3704     | Rectangular Seal     |
1P-3708     | Rectangular Seal     |
8T-2885     | Rectangular Seal     |
NEEG2976     | Decal     |
Caterpillar Information System:
3126B Petroleum Engine E100 Low Engine Oil Pressure Warning
C-10, C-12, C-15 and C-16 Industrial Engines E096 High Fuel Pressure
3126B Industrial Engines Event Codes
3126B Industrial Engines Diagnostic Codes
3126B Industrial Engines Throttle Position Sensor - Calibrate
3408E and 3412E Engines for Caterpillar Built Machines Lubrication System
2004/08/01 The Removal of the Fuel Recirculation System is Required on Certain Engines. {1274}
3126B Industrial Engines Injection Actuation Pressure Sensor - Test
3126B Industrial Engines Injection Actuation Pressure Control Valve Circuit - Test
2005/04/25 Lockout Valves Shut Off Air Supply in the Service Shop {0699}
3126B Industrial Engines ECM/Personality Module - Test
2004/06/01 New Tightening Procedure for the Oil Filter Line {1307}
G3500 Engines Ignition System Spark Plugs - Inspect/Replace
3126B Petroleum Engine Electronic Service Tools
2004/11/01 A New Abrasion Resistant Fuel Line is Now Used {1274}
C15 On-highway Engines Cylinder Head - Remove
C15 On-highway Engines Cylinder Head - Install
2004/08/01 Corrosion-Resistant Sensor and Elbow Are Now Available {1917}
3412E, C30 and C32 Marine Engines Fuel Priming Pump - Remove and Install
3412E, C30 and C32 Marine Engines Fuel Filter Base - Remove and Install
2004/07/01 Engines Are Now Built with Semi-Crowned Lifter Rollers {1209}
2004/07/05 Improved Analysis of Non-Warrantable Failures for Reman Vane Cartridges {5055}
3412E, C30 and C32 Marine Engines Fuel Transfer Pump - Remove
C-10 and C-12 Truck Engines Boost Pressure Sensor