Fuel Priming Pump - Remove and Install
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
- Remove bolts (2).
- Remove fuel priming pump (1) and the gasket.
Show/hide table
| |
| Illustration 1 | g01081889 |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Position the gasket and fuel priming pump (1) on the fuel filter base.
- Install bolts (2).
Show/hide table
|
| |
| Illustration 2 | g01081889 |
Caterpillar Information System:
2004/08/01 Corrosion-Resistant Sensor and Elbow Are Now Available {1917}
C15 On-highway Engines Cylinder Head - Install
C15 On-highway Engines Cylinder Head - Remove
2004/11/01 A New Abrasion Resistant Fuel Line is Now Used {1274}
3126B Petroleum Engine Electronic Service Tools
G3500 Engines Ignition System Spark Plugs - Inspect/Replace
2004/12/27 Test Kit Checks Oil Coolers for Leaks {0768, 0781, 0783, 0784}
3126B Petroleum Engine E100 Low Engine Oil Pressure Warning
C-10, C-12, C-15 and C-16 Industrial Engines E096 High Fuel Pressure
3126B Industrial Engines Event Codes
3126B Industrial Engines Diagnostic Codes
3126B Industrial Engines Throttle Position Sensor - Calibrate
3412E, C30 and C32 Marine Engines Fuel Filter Base - Remove and Install
2004/07/01 Engines Are Now Built with Semi-Crowned Lifter Rollers {1209}
2004/07/05 Improved Analysis of Non-Warrantable Failures for Reman Vane Cartridges {5055}
3412E, C30 and C32 Marine Engines Fuel Transfer Pump - Remove
C-10 and C-12 Truck Engines Boost Pressure Sensor
3412E, C30 and C32 Marine Engines Fuel Transfer Pump - Install
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pan
G3520B Industrial Engine Replacing the ECM
C15 On-highway Engines Camshaft Position Sensor - Remove and Install
C15 On-highway Engines Crankshaft Position Sensor - Remove and Install
C15 On-highway Engines Variable Valve Actuator Oil Pressure Sensor - Remove and Install
C15 On-highway Engines Engine Oil Pressure Sensor - Remove and Install