Boost Pressure Sensor
Show/hide table
| 图 1 | g01392005 |
(1) 压力传感器总成的最终安装扭矩 ... 10 ± 2 N·m (90 ± 18 lb in)
工作温度 ... −40 至 125 °C (−40 至 257 °F)
工作电压 ... 5.00 ± 0.25 VDC
Caterpillar Information System:
3412E, C30 and C32 Marine Engines Fuel Transfer Pump - Remove
2004/07/05 Improved Analysis of Non-Warrantable Failures for Reman Vane Cartridges {5055}
2004/07/01 Engines Are Now Built with Semi-Crowned Lifter Rollers {1209}
3412E, C30 and C32 Marine Engines Fuel Filter Base - Remove and Install
3412E, C30 and C32 Marine Engines Fuel Priming Pump - Remove and Install
2004/08/01 Corrosion-Resistant Sensor and Elbow Are Now Available {1917}
C15 On-highway Engines Cylinder Head - Install
C15 On-highway Engines Cylinder Head - Remove
2004/11/01 A New Abrasion Resistant Fuel Line is Now Used {1274}
3126B Petroleum Engine Electronic Service Tools
G3500 Engines Ignition System Spark Plugs - Inspect/Replace
2004/12/27 Test Kit Checks Oil Coolers for Leaks {0768, 0781, 0783, 0784}
3412E, C30 and C32 Marine Engines Fuel Transfer Pump - Install
C13, C15, and C18 Tier 4 Final Engines Engine Oil Pan
G3520B Industrial Engine Replacing the ECM
C15 On-highway Engines Camshaft Position Sensor - Remove and Install
C15 On-highway Engines Crankshaft Position Sensor - Remove and Install
C15 On-highway Engines Variable Valve Actuator Oil Pressure Sensor - Remove and Install
C15 On-highway Engines Engine Oil Pressure Sensor - Remove and Install
C27 and C32 Engines Electronic Unit Injector - Adjust
C15 On-highway Engines Atmospheric Pressure Sensor - Remove and Install
C15 On-highway Engines Fuel Temperature Sensor - Remove and Install
C15 On-highway Engines Boost Pressure Sensor - Remove and Install
C15 On-highway Engines Coolant Temperature Sensor - Remove and Install