E096 High Fuel Pressure
产生此代码的情况:
发动机已经运转 60 秒钟,并且燃油压力超过燃油系统保护的警告触发点。
系统响应:
电子控制模块(ECM)会记录该事件。
发动机的运转未受影响。
测试步骤 1. 检查有无诊断代码
- 将 Caterpillar 电子技师(ET)连接到维修工具接头上。
- 将钥匙开关转到接通位置(发动机关闭)。
- 检查有无激活的诊断代码和 / 或记录的诊断代码。
预期结果:
没有激活或记录的其他代码。
结果:
- 正常 - 没有激活或记录的其他代码。 低压燃油系统存在机械故障。
修复: 关于测试燃油系统的资料,请参阅系统操作/测试和调整, "燃油系统压力 - 测试"。
停止
- 异常 - 存在激活或记录的诊断代码。
修复: 首先排除激活或记录的其他代码。 请参阅本手册"利用诊断代码进行故障诊断和排除"章节中的相关专题。 确认修理已排除故障。
停止
Caterpillar Information System:
3126B Industrial Engines Event Codes
3126B Industrial Engines Diagnostic Codes
3126B Industrial Engines Throttle Position Sensor - Calibrate
3408E and 3412E Engines for Caterpillar Built Machines Lubrication System
2004/08/01 The Removal of the Fuel Recirculation System is Required on Certain Engines. {1274}
3126B Industrial Engines Injection Actuation Pressure Sensor - Test
3126B Industrial Engines Injection Actuation Pressure Control Valve Circuit - Test
2005/04/25 Lockout Valves Shut Off Air Supply in the Service Shop {0699}
3126B Industrial Engines ECM/Personality Module - Test
2004/06/01 New Tightening Procedure for the Oil Filter Line {1307}
3126B Engine for Caterpillar Built Machines Injector Code - Calibrate
C27 and C32 Industrial and Petroleum Engines Throttle Position Sensor - Calibrate
3126B Petroleum Engine E100 Low Engine Oil Pressure Warning
2004/12/27 Test Kit Checks Oil Coolers for Leaks {0768, 0781, 0783, 0784}
G3500 Engines Ignition System Spark Plugs - Inspect/Replace
3126B Petroleum Engine Electronic Service Tools
2004/11/01 A New Abrasion Resistant Fuel Line is Now Used {1274}
C15 On-highway Engines Cylinder Head - Remove
C15 On-highway Engines Cylinder Head - Install
2004/08/01 Corrosion-Resistant Sensor and Elbow Are Now Available {1917}
3412E, C30 and C32 Marine Engines Fuel Priming Pump - Remove and Install
3412E, C30 and C32 Marine Engines Fuel Filter Base - Remove and Install
2004/07/01 Engines Are Now Built with Semi-Crowned Lifter Rollers {1209}
2004/07/05 Improved Analysis of Non-Warrantable Failures for Reman Vane Cartridges {5055}