Event Codes
Show/hide table
| 事件编码的相互参照 | |||
|---|---|---|---|
| 闪烁编码 | EID/FMI编码 | SPN-FMI编码 | 编码描述 |
| 35 | 004 | 0190-16 | 发动机超速停机 |
| 63 | 005 | 0094-15 | 燃油滤清器阻塞减额 |
| 63 | 006 | 0094-16 | 燃油滤清器阻塞停机 |
| 61 | 015 | 0110-16 | 发动机冷却液温度高减额 |
| 61 | 016 | 0110-00 | 发动机冷却液温度高停机 |
| 61 | 017 | 0110-15 | 发动机冷却液温度高警告 |
| 64 | 025 | 0172-16 | 进气温度高减额 |
| 64 | 027 | 0172-15 | 进气温度高警告 |
| 46 | 039 | 0100-18 | 发动机机油压力低减额 |
| 46 | 040 | 0100-01 | 发动机机油压力低停机 |
| 62 | 057 | 0111-18 | 发动机冷却液液位低减额 |
| 62 | 058 | 0111-01 | 发动机冷却液液位低停机 |
| 62 | 059 | 0111-17 | 发动机冷却液液位低警告 |
| 63 | 095 | 0094-00 | 燃油滤清器阻塞警告 |
| 63 | 096 | 0094-00 | 燃油压力高 |
| 46 | 100 | 0100-17 | 发动机机油压力低警告 |
| 35 | 190 | 0190-00 | 发动机超速警告 |
电子控制模块(ECM)可记录事件。 事件指发动机的工作状况，比如机油压力低或冷却液温度高等。 记录事件通常指示机械问题而不是电子系统问题。
Show/hide table
| 图 1 | g00784650 |
典型模拟温度传感器的输出电压 (显示的是冷却液温度传感器) | |
Caterpillar Information System:
3126B Industrial Engines Diagnostic Codes
3126B Industrial Engines Throttle Position Sensor - Calibrate
3408E and 3412E Engines for Caterpillar Built Machines Lubrication System
2004/08/01 The Removal of the Fuel Recirculation System is Required on Certain Engines. {1274}
3126B Industrial Engines Injection Actuation Pressure Sensor - Test
3126B Industrial Engines Injection Actuation Pressure Control Valve Circuit - Test
2005/04/25 Lockout Valves Shut Off Air Supply in the Service Shop {0699}
3126B Industrial Engines ECM/Personality Module - Test
2004/06/01 New Tightening Procedure for the Oil Filter Line {1307}
3126B Engine for Caterpillar Built Machines Injector Code - Calibrate
C27 and C32 Industrial and Petroleum Engines Throttle Position Sensor - Calibrate
3126B Petroleum Engine Warning Lamp Circuit - Test
C-10, C-12, C-15 and C-16 Industrial Engines E096 High Fuel Pressure
3126B Petroleum Engine E100 Low Engine Oil Pressure Warning
2004/12/27 Test Kit Checks Oil Coolers for Leaks {0768, 0781, 0783, 0784}
G3500 Engines Ignition System Spark Plugs - Inspect/Replace
3126B Petroleum Engine Electronic Service Tools
2004/11/01 A New Abrasion Resistant Fuel Line is Now Used {1274}
C15 On-highway Engines Cylinder Head - Remove
C15 On-highway Engines Cylinder Head - Install
2004/08/01 Corrosion-Resistant Sensor and Elbow Are Now Available {1917}
3412E, C30 and C32 Marine Engines Fuel Priming Pump - Remove and Install
3412E, C30 and C32 Marine Engines Fuel Filter Base - Remove and Install
2004/07/01 Engines Are Now Built with Semi-Crowned Lifter Rollers {1209}