Lockout Valves Shut Off Air Supply in the Service Shop {0699}
- Caterpillar Products:
- All
Show/hide table
Illustration 1 | g01081099 |
Two lockout valves are available to shut off the air supply in the service shop. The lockout valves have slides that can be secured in the closed position with padlocks.
Show/hide table
Specifications     | ||
Part number     | 239-5429     | 239-5430     |
Ports     | 1/2 inch NPT (female)     | 3/4 inch NPT (female)     |
Size (L X W X H)     | 54 X 38 X 58 mm (2.1 X 1.5 X 2.3 inch)     |
70 X 35 X 63 mm (2.8 X 1.4 X 2.5 inch)     |
Maximum inlet pressure     | 1700 kPa (247 psi)     |
1700 kPa (247 psi)     |
Maximum temperature     | 65 °C (149 °F)     |
65 °C (149 °F)     |
Padlock hole diameter     | 7.62 mm (0.300 inch)     |
7.62 mm (0.300 inch)     |
Body     | Zinc (black)     | Zinc (black)     |
Slide     | Acetal plastic (yellow)     | Acetal plastic (yellow)     |
Elastomers     | Nitrile     | Nitrile     |
Weight     | 0.32 kg (0.7 lb)     |
0.28 kg (0.62 lb)     |
Caterpillar Information System:
3126B Industrial Engines ECM/Personality Module - Test
2004/06/01 New Tightening Procedure for the Oil Filter Line {1307}
3126B Engine for Caterpillar Built Machines Injector Code - Calibrate
C27 and C32 Industrial and Petroleum Engines Throttle Position Sensor - Calibrate
3126B Petroleum Engine Warning Lamp Circuit - Test
C27 and C32 Industrial and Petroleum Engines Switch Circuits - Test
3126B Petroleum Engine PTO Ramp Up/Down Switch Circuit - Test
3126B Petroleum Engine Maintenance Due Lamp Circuit - Test
C-10 and C-15 Petroleum Engines Engine Temperature Sensor Open or Short Circuit - Test
C-10 and C-15 Petroleum Engines Engine Pressure Sensor Open or Short Circuit - Test
3126B Petroleum Engine Electrical Power Supply Circuit - Test
3126B Petroleum Engine Digital Sensor Supply Circuit - Test
3126B Industrial Engines Injection Actuation Pressure Control Valve Circuit - Test
3126B Industrial Engines Injection Actuation Pressure Sensor - Test
2004/08/01 The Removal of the Fuel Recirculation System is Required on Certain Engines. {1274}
3408E and 3412E Engines for Caterpillar Built Machines Lubrication System
3126B Industrial Engines Throttle Position Sensor - Calibrate
3126B Industrial Engines Diagnostic Codes
3126B Industrial Engines Event Codes
C-10, C-12, C-15 and C-16 Industrial Engines E096 High Fuel Pressure
3126B Petroleum Engine E100 Low Engine Oil Pressure Warning
2004/12/27 Test Kit Checks Oil Coolers for Leaks {0768, 0781, 0783, 0784}
G3500 Engines Ignition System Spark Plugs - Inspect/Replace
3126B Petroleum Engine Electronic Service Tools