Fuel System Primary Filter/Water Separator - Drain
Show/hide table
渗漏或溅溢到热表面或电气部件上的燃油会引起失火。 为防止可能的伤害,当更换燃油滤清器或油水分离器滤芯时,要将起动开关断开。 应立即将溅溢的燃油清除干净。 |
Show/hide table
注意 |
---|
油水分离器不是一个滤清器。 油水分离器将水从燃油中分离出来。 决不允许在油水分离器中的水位过半时运转发动机。 可能导致发动机严重损坏。 |
- 打开排放口 (2) 。 用适当的容器盛接放掉的水。 适当地处置放掉的水。
Show/hide table
图 1 | g00992049 |
(1) 过滤器 (2) 排放口 |
- 关闭排放口 (2) 。
Show/hide table
注意 |
---|
油水分离器在发动机正常运行时处于负压状态。 确保排放口被牢固拧紧以便防止空气进入燃油系统中。 |
Caterpillar Information System:
C1.5 and C2.2 Generator Leads - Connect
3044C Industrial Engine Fuel System Filter - Replace
C7 On-highway Engine Water Pump - Install
Installation Guide for Industrial Electronic Engine Displays Wiring - General
3044C Industrial Engine Fuel System - Prime
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070} Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
3618 Engine Engine Mounts - Inspect
Installation Guide for Industrial Electronic Engine Displays General Information
G3304 and G3306 Engines Water Pump - Disassemble
G3304 and G3306 Engines Water Pump - Install
3054E Industrial Engine Flywheel - Install
G3304 and G3306 Engines Water Pump - Remove
C7 On-Highway Engine Air Compressor - Remove and Install
330B Excavator Hydraulic System Accumulator (Pilot) - Test and Charge
C7 On-highway Engine Water Pump - Disassemble
C7 On-highway Engine Water Pump - Assemble
C1.5 and C2.2 Generator Rotating Rectifier - Test
Installation Guide for Industrial Electronic Engine Displays Wiring - CAT Data Link (CDL)
3500B and 3500C Marine Propulsion Engines Engine Sensor Open/Short Test
2003/09/01 New Slave Piston Lash Settings are Available for Heavy-Duty Diesel Engines {1119, 1129}
Cold Weather Recommendations for On-Highway Diesel Truck Engines Cold Weather Recommendation Charts
Installation Guide for Industrial Electronic Engine Displays Wiring - J1939 Data Link
3406E, C-10 and C-12 On-highway Engines Replacing the ECM
G3304 and G3306 Engines Water Pump - Assemble