3056E Industrial Engine Caterpillar

Connecting Rod Bearing Journal

Usage:

3056E 356

Show/hide table

Table 1
Connecting Rod Bearing Journal
Original Size Journal	63.47 to 63.49 mm (2.499 to 2.500 inch)
Undersize Journal 0.25 mm (0.010 inch)	63.22 to 63.24 mm (2.489 to 2.490 inch)
Undersize Journal 0.51 mm (0.020 inch)	62.96 to 62.98 mm (2.479 to 2.480 inch)
Undersize Journal 0.76 mm (0.030 inch)	62.71 to 62.73 mm (2.469 to 2.470 inch)

Maximum permissible wear of the main bearing journals ... 0.040 mm (0.0016 inch)

Clearance between the connecting rod and the crankshaft journal for turbocharged engines ... 0.030 to 0.081 mm (0.0012 to 0.0032 inch)

Caterpillar Information System:

3056E Industrial Engine Electrical System

C9 Marine Engines Injection Actuation Pressure Sensor - Test

3500B Engines Air Shutoff

C9 Marine Engines and C9 Marine Generator Sets Exhaust Manifold - Remove and Install

3054C Industrial Engine Fuel Injection Nozzles - Install

3044C Industrial Engine Battery - Replace

C11 and C13 Engines for Caterpillar Built Machines Fuel System Pressure - Test

3054C Industrial Engine Fuel Injection Nozzles - Remove

C15 and C18 Petroleum Generator Sets Fuel Conservation Practices

C1.5 and C2.2 Generator Sets Engine Operation

C11 and C13 Engines for Caterpillar Built Machines Inlet Manifold Pressure - Test

3054C Industrial Engine Fuel Injection Lines - Remove and Install

3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Accelerator Pedal (Throttle) Position Sensor Circuit - Test

C9 Marine Engines Air Inlet Heater Circuit - Test

3054C Industrial Engine Fuel Injection Pump - Remove - Delphi DP210

3054C Industrial Engine Fuel Injection Pump - Install - Delphi DP210

C15 and C18 Petroleum Generator Sets Generator Load - Check

3406E and 3456 Generator Set Engines Speed/Timing Sensor

3044C Industrial Engine Overhaul Considerations

3500B and 3500 Marine Propulsion Engines with EUI Option Engine Valve Lash - Adjust

C15 On-Highway Engine Flywheel

C9 Marine Engines and C9 Marine Generator Sets Water Temperature Regulator - Remove and Install

3500B and 3500 Marine Propulsion Engines with EUI Option Fuel Injector - Adjust

C15 On-highway Engine Piston Cooling Jet