Fuel Injection Nozzles - Remove
拆卸步骤
开始:
- 拆下燃油喷油管。 请参阅拆解和组装, "燃油喷油管路 - 拆卸和安装"。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修产品时,务必留心,确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前,要准备好用合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上液体的工具及用品,参考专门出版物, NENG2500, "卡特彼勒工具和修理车间设备指南"。 按照当地法规和指令处置所有液体。 |
- 从喷油嘴 (1) 上拆下软管 (2) 。
Show/hide table
图 1 | g00975056 |
- 拆下螺栓 (3) 。 从喷油嘴上拆下卡箍 (4) 。
- 从缸盖上拆下喷油嘴。 从喷油嘴上拆下 O 形密封圈 (5) 。
- 从缸盖上拆下座垫圈 (6) 。
注: 如果拆下了原来的座垫圈,则在安装新的座垫圈后,喷油嘴的凸出量将不正确。
Caterpillar Information System:
C15 and C18 Petroleum Generator Sets Fuel Conservation Practices
C1.5 and C2.2 Generator Sets Engine Operation
C11 and C13 Engines for Caterpillar Built Machines Inlet Manifold Pressure - Test
3054C Industrial Engine Fuel Injection Lines - Remove and Install
C9 Marine Engines Engine Pressure Sensor Open or Short Circuit - Test
3054E Industrial Engine Glow Plugs - Remove and Install
C9 Marine Engines and C9 Marine Generator Sets Turbocharger - Install
XQ60 Rental Generator Set Fire Prevention and Explosion Prevention
C9 Marine Engines Analog Sensor Supply Circuit - Test
C9 Marine Auxiliary and Marine Generator Set Engines Injector Solenoid Circuit - Test
Mounting Brackets for Refrigerant Compressor {1802} Mounting Brackets for Refrigerant Compressor {1802}
3054E Industrial Engine Front Cover - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines Fuel System Pressure - Test
3044C Industrial Engine Battery - Replace
3054C Industrial Engine Fuel Injection Nozzles - Install
C9 Marine Engines and C9 Marine Generator Sets Exhaust Manifold - Remove and Install
3500B Engines Air Shutoff
C9 Marine Engines Injection Actuation Pressure Sensor - Test
3056E Industrial Engine Electrical System
3056E Industrial Engine Connecting Rod Bearing Journal
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Accelerator Pedal (Throttle) Position Sensor Circuit - Test
C9 Marine Engines Air Inlet Heater Circuit - Test
3054C Industrial Engine Fuel Injection Pump - Remove - Delphi DP210
3054C Industrial Engine Fuel Injection Pump - Install - Delphi DP210