Air Shutoff
Show/hide table
图 1 | g00956104 |
Show/hide table
图 2 | g00986704 |
(1) 开关组件
-
组装前,使用 4C-5598 高温防咬合剂 润滑有头螺钉的螺纹。
- 扭矩 ... 12 N·m (106 lb in)
(2) 有头螺钉
-
组装前,使用 4C-5598 高温防咬合剂 润滑有头螺钉的螺纹。
- 扭矩 ... 7 ± 1 N·m (60 ± 9 lb in)
(3) 轴
组装前,使用 4C-5598 高温防咬合剂 润滑轴。
(4) 盖
组装前,在阀体和空气关断盖间涂抹 4C-9614 硅密封胶 。
(5) 有头螺钉
-
组装前,使用 4C-5598 高温防咬合剂 润滑有头螺钉的螺纹。
- 扭矩 ... 10 ± 2 N·m (84 ± 13 lb in)
(6) 有头螺钉
- 扭矩 ... 10 ± 2 N·m (84 ± 13 lb in)
Caterpillar Information System:
C9 Marine Engines and C9 Marine Generator Sets Exhaust Manifold - Remove and Install
3054C Industrial Engine Fuel Injection Nozzles - Install
3044C Industrial Engine Battery - Replace
C11 and C13 Engines for Caterpillar Built Machines Fuel System Pressure - Test
3054C Industrial Engine Fuel Injection Nozzles - Remove
C15 and C18 Petroleum Generator Sets Fuel Conservation Practices
C1.5 and C2.2 Generator Sets Engine Operation
C11 and C13 Engines for Caterpillar Built Machines Inlet Manifold Pressure - Test
3054C Industrial Engine Fuel Injection Lines - Remove and Install
C9 Marine Engines Engine Pressure Sensor Open or Short Circuit - Test
3054E Industrial Engine Glow Plugs - Remove and Install
C9 Marine Engines and C9 Marine Generator Sets Turbocharger - Install
C9 Marine Engines Injection Actuation Pressure Sensor - Test
3056E Industrial Engine Electrical System
3056E Industrial Engine Connecting Rod Bearing Journal
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Accelerator Pedal (Throttle) Position Sensor Circuit - Test
C9 Marine Engines Air Inlet Heater Circuit - Test
3054C Industrial Engine Fuel Injection Pump - Remove - Delphi DP210
3054C Industrial Engine Fuel Injection Pump - Install - Delphi DP210
C15 and C18 Petroleum Generator Sets Generator Load - Check
3406E and 3456 Generator Set Engines Speed/Timing Sensor
3044C Industrial Engine Overhaul Considerations
3500B and 3500 Marine Propulsion Engines with EUI Option Engine Valve Lash - Adjust
C15 On-Highway Engine Flywheel