Speed/Timing Sensor
There are two sensors for timing the engine. There is a speed sensor on the crankshaft in order to determine the position of the crankshaft. This sensor is used during normal engine operation. Another speed sensor is located on the camshaft for starting the engine.
Show/hide table
 | |
| Illustration 1 | g00956194 |
Speed sensor for the crankshaft | |
Lubricate seal (1) with engine oil before installation.
Show/hide table
 | |
| Illustration 2 | g00956196 |
Speed sensor for the camshaft | |
Lubricate seal (2) with engine oil before installation.
Caterpillar Information System:
C15 and C18 Petroleum Generator Sets Generator Load - Check
3054C Industrial Engine Fuel Injection Pump - Install - Delphi DP210
3054C Industrial Engine Fuel Injection Pump - Remove - Delphi DP210
C9 Marine Engines Air Inlet Heater Circuit - Test
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Accelerator Pedal (Throttle) Position Sensor Circuit - Test
3056E Industrial Engine Connecting Rod Bearing Journal
3056E Industrial Engine Electrical System
C9 Marine Engines Injection Actuation Pressure Sensor - Test
3500B Engines Air Shutoff
C9 Marine Engines and C9 Marine Generator Sets Exhaust Manifold - Remove and Install
3054C Industrial Engine Fuel Injection Nozzles - Install
3044C Industrial Engine Battery - Replace
3044C Industrial Engine Overhaul Considerations
3500B and 3500 Marine Propulsion Engines with EUI Option Engine Valve Lash - Adjust
C15 On-Highway Engine Flywheel
C9 Marine Engines and C9 Marine Generator Sets Water Temperature Regulator - Remove and Install
3500B and 3500 Marine Propulsion Engines with EUI Option Fuel Injector - Adjust
C15 On-highway Engine Piston Cooling Jet
Installation Instructions for the 9W-1494 Service Meter Kit {7478} Installation Instructions for the 9W-1494 Service Meter Kit {7478}
C9 Marine Engines and C9 Marine Generator Sets Fuel Priming Pump - Remove and Install
C18 Marine and Marine Generator Set Engines Engine Oil Pan
3054E Industrial Engine Engine Oil Pan - Remove and Install
3054E Industrial Engine Engine Oil Pump - Install - Engines Without a Balancer
3054E Industrial Engine Engine Oil Pump - Remove - Engines Without a Balancer