H80 S Hydraulic Hammers Caterpillar


Tool Retaining Pins - Inspect/Replace

Usage:

H80 MY8


Ilustrace 1g02966716

  1. Demontujte čep z kladiva.

  2. Zkontrolujte čep, zda není opotřebený či prasklý.

  3. Změřte velikost opotřebení. Porovnejte rozměr (D1) s rozměrem (D2). Rozdíl mezi rozměrem (D1) a rozměrem (D2) musí být menší než 2.0 mm (0.07 inch). Pokud je rozdíl větší než 2.0 mm (0.07 inch), je nutné čep vyměnit.

  4. Pokud je čep prasklý, je nutné jej vyměnit.

Caterpillar Information System:

TRS10, TRS14, TRS18, and TRS23 Tilt - Rotator Hydraulic Cylinder - Remove and Install - Tilt Cylinder
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Steering Control Support
PM820, PM822, and PM825 Cold Planer Track Pad Bolts - Tighten
C9.3B Aftertreatment Systems SCR Catalyst Inlet Temperature Sensor - Test
C9.3B Aftertreatment Systems DEF Pump Motor - Test
C9.3B Aftertreatment Systems ARD Nozzle Heater - Test
C9.3B Aftertreatment Systems ARD Ignition - Test
C7.1 Engines and Generator Sets ARD Failed to Ignite
C9.3B Aftertreatment Systems ARD Fuel Supply - Test
C9.3B Aftertreatment Systems ARD Combustion Air - Test
A New Stick and Bearing Assembly Is Now Used on Certain 320E Excavators {6502} A New Stick and Bearing Assembly Is Now Used on Certain 320E Excavators {6502}
C9.3B Aftertreatment Systems Aftertreatment Identification Module - Test
Incorrect Substitution of the 12 Point Cylinder Head Bolt on all G3500 and 3500 Engines {1100} Incorrect Substitution of the 12 Point Cylinder Head Bolt on all G3500 and 3500 Engines {1100}
Installation of the 520-6470 Blank Hook As. on Certain Wheel Loaders {6102} Installation of the 520-6470 Blank Hook As. on Certain Wheel Loaders {6102}
TRS10, TRS14, TRS18, and TRS23 Tilt - Rotator Hydraulic Cylinder - Remove and Install - Quick Coupler (Dedicated Wedge Lock) Cylinder
TRS10, TRS14, TRS18, and TRS23 Tilt - Rotator Swivel - Remove and Install - Quick Coupler Dedicated Wedge Lock
730C2 and 725C2 Articulated Truck Power Train Differential Pinion - Remove and Install - Front and Rear
TRS10, TRS14, TRS18, and TRS23 Tilt - Rotator Swivel - Remove and Install - Quick Coupler S-Type
TRS10, TRS14, TRS18, and TRS23 Tilt - Rotator Swivel - Disassemble
C7.1 Engines and Generator Sets ARD Fuel Pressure Is High
TRS10, TRS14, TRS18, and TRS23 Tilt - Rotator Swivel - Assemble
<B>Wiper Motor Shaft Breakage on Certain K, L, and M Series Medium Wheel Loaders</B> {7305} <B>Wiper Motor Shaft Breakage on Certain K, L, and M Series Medium Wheel Loaders</B> {7305}
730C2 and 725C2 Articulated Truck Power Train Transfer Case - Remove and Install - Center Axle
730C2 and 725C2 Articulated Truck Power Train Transfer Case - Disassemble - Center Axle
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.