Swivel - Assemble
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | - | Rubber Hammer | 1 |
- Install dowel pins (12).
Show/hide table
Illustration 2 g06127300 - Install seals (11) to plug assemblies (9) and flat face plugs (8). Lubricate seals (11) with grease.
Show/hide table
Illustration 3 g06123152 - Install flat face plugs (8), plug assemblies (9), and plug (10) to swivel crown (3).
Show/hide table
Illustration 4 g06142788 Show/hide table
Illustration 5 g06123150 - Install seals (7) as shown in illustration 4. Install seals (7). Lubricate seals (7) with grease.
Show/hide table
Illustration 6 g06123149 - Install O-ring seal (5) and bearing (6). Lubricate O-ring seal (6) with grease.
Show/hide table
Illustration 7 g06127290 - Use Tooling (A) to install swivel crown (3). Install swivel crown (3).
Show/hide table
Illustration 8 g06123142 - Install O-ring seal (4) to bearing (2). Lubricate O-ring seal (4) with grease.
Show/hide table
Illustration 9 g06127289 - Install bearing (2) and retaining ring (1) to swivel crown (3).
Show/hide table
| |
| Illustration 1 | g06142775 |
End By:
- Install the swivel.
Caterpillar Information System:
C7.1 Engines and Generator Sets ARD Fuel Pressure Is High
TRS10, TRS14, TRS18, and TRS23 Tilt - Rotator Swivel - Disassemble
TRS10, TRS14, TRS18, and TRS23 Tilt - Rotator Swivel - Remove and Install - Quick Coupler S-Type
730C2 and 725C2 Articulated Truck Power Train Differential Pinion - Remove and Install - Front and Rear
TRS10, TRS14, TRS18, and TRS23 Tilt - Rotator Swivel - Remove and Install - Quick Coupler Dedicated Wedge Lock
TRS10, TRS14, TRS18, and TRS23 Tilt - Rotator Hydraulic Cylinder - Remove and Install - Quick Coupler (Dedicated Wedge Lock) Cylinder
Installation of the 520-6470 Blank Hook As. on Certain Wheel Loaders {6102} Installation of the 520-6470 Blank Hook As. on Certain Wheel Loaders {6102}
Incorrect Substitution of the 12 Point Cylinder Head Bolt on all G3500 and 3500 Engines {1100} Incorrect Substitution of the 12 Point Cylinder Head Bolt on all G3500 and 3500 Engines {1100}
H80 S Hydraulic Hammers Tool Retaining Pins - Inspect/Replace
TRS10, TRS14, TRS18, and TRS23 Tilt - Rotator Hydraulic Cylinder - Remove and Install - Tilt Cylinder
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Steering Control Support
PM820, PM822, and PM825 Cold Planer Track Pad Bolts - Tighten
<B>Wiper Motor Shaft Breakage on Certain K, L, and M Series Medium Wheel Loaders</B> {7305} <B>Wiper Motor Shaft Breakage on Certain K, L, and M Series Medium Wheel Loaders</B> {7305}
730C2 and 725C2 Articulated Truck Power Train Transfer Case - Remove and Install - Center Axle
730C2 and 725C2 Articulated Truck Power Train Transfer Case - Disassemble - Center Axle
349F and 352F Excavator Machine System Service Tools
349F and 352F Excavator Machine System Diagnostic Capabilities
PM820, PM822, and PM825 Cold Planer Machine Systems Gear Motor - Remove and Install - Ventilation
G3500H Generator Set Engine Coolant Pressure Is High
G3500H Generator Set Engine Coolant Temperature Is Low
G3500H Generator Set Engine Detonation Occurrence
PM820, PM822, and PM825 Cold Planer Machine Systems Wear Plate (Rotor Chamber) - Remove and Install
PM820, PM822, and PM825 Cold Planer Machine Systems Rotor Drive Clutch - Disassemble
PM820, PM822, and PM825 Cold Planer Machine Systems Rotor Drive Clutch - Assemble