Electronic Control System Operation
Show/hide table
Illustration 1 | g00734858 |
Electronic control system |
Various sensors provide engine data to the electronic control module (ECM). The ECM processes this data. The ECM sends electronic signals to the fuel injector solenoids. The solenoids are energized in order to start the fuel discharge from the fuel injectors. The solenoids are de-energized in order to stop the fuel discharge from the fuel injectors. Refer to Systems Operation, "Fuel Injector" for a complete explanation of the fuel injection process.
Caterpillar Information System:
3054, 3054B and 3056 Marine Engines Cold Weather Starting
3054, 3054B and 3056 Marine Engines Starting the Engine
G3408 and G3412 Engines Flywheel Housing
3500 Generator Set Engines Coolant Temperature Switch
3054, 3054B and 3056 Marine Engines Gauges and Indicators
G3406 Engines Coolant Temperature Sensor
C-10 and C-12 Industrial Engines Fuel Priming Pump and Primary Fuel Filter
G3406 Engines Power Take-Off Clutch
3114, 3116 and 3126 Engines Air Compressor Drive Gear - Install
G3406 Engines Accessory Drive
G3406 Engines Vibration Damper and Pulley
3054, 3054B and 3056 Marine Engines Engine Description
3500B and 3500B High Displacement Generator Set Engines Fuel Injector
3500B Engines Jacket Water Cooling Circuit
G3406 Engines Timing Advance
3500B and 3500B High Displacement Generator Set Engines Separate Circuit Cooling System
3508B Industrial Engines Crankshaft
3508B Engine for Caterpillar Built Machines Camshaft
3500B and 3500B High Displacement Generator Set Engines Alternator
3500B and 3500B High Displacement Generator Set Engines Starting Solenoid
3500B and 3500B High Displacement Generator Set Engines Starting Motor
3500B and 3500B High Displacement Generator Set Engines Engine Speed Sensor
G3406 Engines Spark Plug Adapter
G3406 and G3412 Generator Set Engines Ignition Transformer