G3406 Engines Caterpillar


Vibration Damper and Pulley

Usage:

G3406 1RK



Illustration 1g00379837

Typical example

(1) Bolt

Apply 4C-5593 Anti-Seize Compound to all of the bolts at assembly.
Torque ... 200 ± 25 N·m (150 ± 20 lb ft)

(2) Adapter

(3) Damper assembly

(4) Pulley

Note: The dash marks on the front of the damper assembly must be in alignment with each other. A new damper assembly will be needed if the dash marks are not in alignment.

Maximum permissible face runout of the damper assembly ... 0.00 to 2.03 mm (0.000 to 0.080 inch)


NOTICE

Thoroughly inspect the viscous damper for signs of leakage or for signs of a dented (damaged) case. Either of these conditions can cause the weight to make contact with the case. This can affect the viscous damper's operation.


Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.