Idler Gear Assembly
Show/hide table
Illustration 1 | g00734292 |
(1) Bearing bore and diameter
- Bore in bearing of gear after assembly ... 63.602 ± 0.038 mm (2.5040 ± 0.0015 inch)
- Diameter of bearing surface of the shaft ... 63.500 ± 0.013 mm (2.5000 ± 0.0005 inch)
(2) Install the bearing from the rear face of the gear assembly to the following depth. ... 1.5 ± 0.5 mm (0.06 ± 0.02 inch)
(3) Length of gear ... 47.60 ± 0.06 mm (1.874 ± 0.002 inch)
Length of the bearing surface of the shaft ... 47.85 ± 0.05 mm (1.884 ± 0.002 inch)
Caterpillar Information System:
3408B and 3408C Industrial and Marine Engines Exhaust Manifold - Water Cooled
Oil Mist Detectors Performance Tests
G3406 Engines Valve Cover
G3304 and G3306 Engines Air Starting Motor
3500B Engines Turbocharger
Oil Mist Detectors Number 14 LED is Blinking - Troubleshoot
Oil Mist Detectors Repair Procedure
G3408C and G3412C Engines Engine Oil Pan
SPT343 Truck Mounted Pumper Emergency Stopping
3500 Industrial Engines Air Cleaner Adapter
G3408C and G3412C Engines Air Cleaner
Oil Mist Detectors Oil Mist Alarm
3044C Industrial Engine Electrical System
2000/08/01 New Air Compressor Water Hose Assemblies Are Now Available {1380}
Uninterruptible Power Supply (UPS) 250 Maintenance Interval Schedule
3524B Engines for 797 and 797B Off-Highway Trucks Valve Lash Check
3054, 3054B and 3056 Marine Engines Engine Description
G3406 Engines Vibration Damper and Pulley
G3406 Engines Accessory Drive
3114, 3116 and 3126 Engines Air Compressor Drive Gear - Install
G3406 Engines Power Take-Off Clutch
C-10 and C-12 Industrial Engines Fuel Priming Pump and Primary Fuel Filter
G3406 Engines Coolant Temperature Sensor
3054, 3054B and 3056 Marine Engines Gauges and Indicators