Accessory Drive
Show/hide table
 | |
| Illustration 1 | g00502347 |
(1) Bearing
- Bore in the bearing of the gear after assembly ... 63.602 ± 0.039 mm (2.5040 ± 0.0015 inch)
- Diameter of the bearing surface of the shaft ... 63.500 ± 0.013 mm (2.5000 ± 0.0005 inch)
(2) Install the bearing from the face of the gear to the following depth. ... 1.5 ± 0.5 mm (0.060 ± 0.02 inch)
(3) Gear
- Length of the gear ... 50.75 ± 0.05 mm (1.998 ± 0.002 inch)
- Length of bearing surface on the shaft ... 51.00 ± 0.05 mm (2.008 ± 0.002 inch)
(4) Front spacer plate
(5) Rear face of the front housing
Caterpillar Information System:
G3406 Engines Vibration Damper and Pulley
3054, 3054B and 3056 Marine Engines Engine Description
3524B Engines for 797 and 797B Off-Highway Trucks Valve Lash Check
Uninterruptible Power Supply (UPS) 250 Maintenance Interval Schedule
2000/08/01 New Air Compressor Water Hose Assemblies Are Now Available {1380}
3044C Industrial Engine Electrical System
G3406 and G3412 Generator Set Engines Idler Gear Assembly
3408B and 3408C Industrial and Marine Engines Exhaust Manifold - Water Cooled
Oil Mist Detectors Performance Tests
G3406 Engines Valve Cover
G3304 and G3306 Engines Air Starting Motor
3500B Engines Turbocharger
3114, 3116 and 3126 Engines Air Compressor Drive Gear - Install
G3406 Engines Power Take-Off Clutch
C-10 and C-12 Industrial Engines Fuel Priming Pump and Primary Fuel Filter
G3406 Engines Coolant Temperature Sensor
3054, 3054B and 3056 Marine Engines Gauges and Indicators
3500 Generator Set Engines Coolant Temperature Switch
G3408 and G3412 Engines Flywheel Housing
3054, 3054B and 3056 Marine Engines Starting the Engine
3054, 3054B and 3056 Marine Engines Cold Weather Starting
3500B and 3500B High Displacement Generator Set Engines Electronic Control System Operation
3500B and 3500B High Displacement Generator Set Engines Fuel Injector
3500B Engines Jacket Water Cooling Circuit