Service Meter - Remove and Install
Removal Procedure
- Disconnect all electrical wires (1) to the service meter and emergency stop.
Show/hide table
 | |
| Illustration 1 | g00678417 |
- Remove the bolts and the washers (4) that hold the service meter and the emergency stop to the bracket (3) .
- Remove the service meter and emergency stop (2) .
Installation Procedure
- Position the service meter and the emergency stop (2) on the bracket (3) .
- Install bolts and washers (4) .
- Connect electrical wires (1) to the service meter and emergency stop.
Caterpillar Information System:
3512B Engine for SPF343, SPS343, and SPT343 Pumpers Diagnostic Codes
3408E and 3412E Engines for Caterpillar Built Machines Air Inlet and Exhaust System
3176C and 3196 Marine Engines Inlet Air Temperature Sensor - Remove and Install
2000/07/01 High Efficiency Orifice (HEO) Fuel Injectors Are Now Used For Service Repairs {1290}
3176C and 3196 Marine Engines Coolant Level Sensor - Remove and Install
3176C and 3196 Marine Engines Engine Support (Front) - Remove and Install
G3304 and G3306 Engines Test Tools for the Cooling System
2000/02/01 New Method To Determine When To Clean The Aftercooler Core {1064}
3176C and 3196 Marine Engines Water Outlet Manifold - Install
2000/02/01 Revised Oil Level Gauge Calibration Chart for 3412E Marine Engines {1326}
3512B Petroleum Engines with the ADEM 2 Electronic Control Module Engine Cranks but Will Not Start
3126B Engines Finding Top Center Position for No. 1 Piston
3114, 3116, and 3126 Engines for Caterpillar Built Machines Fuel Priming Pump and Primary Fuel Filter - Remove and Install
3176C and 3196 Marine Engines Manifold Adapter - Remove and Install - Right Hand Engine Application
3508B Industrial Engines Output for the General System Alarm
3508B Industrial Engines Start Enable Output
3508B Industrial Engines Shutdown Notification Output
3114, 3116, and 3126 Engines for Caterpillar Built Machines Engine Oil Pressure Sensor - Remove and Install
3500B and 3500B High Displacement Generator Set Engines Air Shutoff
3500B and 3500B High Displacement Generator Set Engines Grounding Practices
3408E and 3412E Engines for Caterpillar Built Machines Cooling System
C-10 and C-12 Industrial Engines Engine Design
3176C and 3196 Industrial Engines Engine Design
3126B Engines Unit Injector - Test